Hq-450dy High Quality Cheap Medical Film Printer

Hq-450dy High Quality Cheap Medical Film Printer

1+
5300 USD
5+
5200 USD

add to cart
Model NO. HQ-450DY
Medical Devices Ad. Approval No. Ssyjxzz20102300187
Gray Scale Contrast Resolution 12 Bits (4096)
Certificate CE ISO
Trademark Healicom
Origin Jiangsu, China
Medical Device Regulatory Type Type 1
Spatial Resolution 320dpi (12.6 Pixels/mm)
Film Output One Receive Tray, 50 Sheets Capacity
Weight 40kg
Specification CE, ISO
HS Code 9018909090


Print medical films for multiple front-end equipment such as CR/DR/CT/MR etc.
FEATURES
Low fog, high sharpness, high max density, bright tone, conveniently to use. It can be processed under room light since the film was not sensitive to light, It can be directly printed by HQ-450DY to get ideal image.
Double cassette chambers of design, online printable for 2 spec of film at the same time. Printed image is clean, with full range of layer, same level as international famous brand.
MAIN PRODUCT PARAMETERS
Print Technology Direct thermal (dry, daylight safe operation)
Spatial Resolution 320dpi (12.6 pixels/mm)
Throughput 35×43 cm (14'×17') About 80 films per hourAbout 80 films per hourilms per hour
Time to Operate 3 minutes (ready to print from 'off');off")quot;)
Gray scale Contrast Resolution 12 bits (4096)
Film Input Two supply cassettes, 50 to 100 sheets capacity each cassette
Film Output One receive tray, 50 sheets capacity
Film Sizes 14'×17', 11'x14', 10'x12', 8' ×10'x14", 10"x12", 8" ×10", 10"x12", 8" ×10"
Supply Cassettes All Film is pre-packaged in factory sealed, disposable cassettes
Interfaces 10/100 Base-T Ethernet (RJ-45)
Network Protocols Standard DICOM connection, networking print
Image Quality Automatic calibration using built-in densitometer
Image Control Contrast, Gray, Polarity, Rotation, Saturation, Scaling
Sheet Control Density Adjusting (D max), Look-Up Tables (LUT), Captions, Sheet Coverage, Border Fill
Control Panel Large, backlit LCD display, displaying Online, Alert, Fault and Active
Processor Intel
Memory 256 MB RAM
Hard Disk 20GB (18GB available for spooling)
Power 100-120/230V-50/60Hz, 600W printing, 75W idle
Weight 40kg
Engine Dimensions 41cm (H), 56cm (W), 72cm (L)
Environment Operating Temperature: 15-30°Cdeg;Cdeg;C
Storage: -22.2~50.6°Cdeg;Cdeg;C
Operating Humidity: 10~70% R.H. (non-condensing)