Mslhx06 High Frequency and Pressure X Ray Machine

10000-50000 USD

(1) High frequency and pressure generator: Size: 600*420*650mm
v the high frequency multiple-pulse X ray generator is used for radio diagnosis, it ensures data and repetition's accuracy and shorten time of exposure.
v
v with the most professional and stable high frequency and pressure generator, it makes a high dose output,high power load and ultrahigh frequency contravariant which perfectly guarantees users' radiography quality. The generator is compatible with almost all good brands of tube in the world.
v it is equipped with APR/AEC which possess tube overload protection)
v the control functions of the generator are integrated in the system control center
v It can meet high frequency filming requirements since its rated voltage is with a high of 150KV
v 50KW large capacity makes a longer uninterrupted work
v perfect performance and stability
v it is complicated to set parameters for most of generators which lead to time wast. But our generator is equipped with easier parameters settings and firmwares updating programs.
v rotating anode's calorific capacity display and protection can prevent overheat of pipe shroud cause by overload.
v It stops the rotating anode by DC, it makes less noise after exposure.

Configuration parameter of the x-ray machine

NO.	technical requirements
1	high frequency and pressure X ray generator for medical diagnostic use
1.1	input power: 380V±38V,50Hz±1Hz.
1.2	maximum power output :50 kW
1.3	Photography tube voltage:it can be adjusted continuously, adjustable step width is 1KV,adjustable range: 40kV~150kV
1.4	photography tube current:it can be adjusted by sections. Adjustable range: 10mA~630mA
1.5	load time: adjustable range: 0.001-10sec
1.6	current can be adjusted by sections. Adjustable range: 0.1mAs~500mAs
1.7	working frequency: 100kHz
2	X ray tube
2.1	:highest peak tube voltage: 125kV
2.2	maximum filament current's heat characteristic: big focus:5.4A, small focus:5.4A.
2.3	focus: small focus:0.6mm;big focus:2.0mm
2.4	Anode input power:small focus:18kw;big focus:50kw
2.5	Anode optics angle: 14
2.6	rotate speed of Anode: 2800rmb
2.7	Anode thermal capacity: 160kJ (220kHU)
2.8	tube module thermal capacity: 1250KHU(900KJ)
3	Filming bed
3.1	length: 2200mm±10%
3.2	width: 750mm±10%
3.3	lengthways moving range of bed surface: 1000mm±10%
3.4	crosswise moving range of bed surface: 250mm±10%
3.5	bed surface locking pattern: electromagnetic lock(permanent magnet)
3.6	bed surface locking control: foot switch
3.7	breaking force: ≥100N
3.8	starting force:≤50N
3.9	load bearing of bed panel: ≥150kg
4	stand column
4.1	height: 1920mm±10%
4.2	up-and-down moving range: 420mm-1810mm±10%
4.3	up-and-down moving range along the lathe bed: 2000mm±50mm
4.4	vertical lift range along the lathe bed: 430mm-1660mm±10%
4.5	left and right moving range of flat panel detector : 350mm±5%
4.6	X ray tube module's slewing range around the cross arm(power brake locking): 360°
4.7	X ray tube slewing range: 0° ±2° ~ ±90° ±2°
4.8	stand column slewing range: fixed
5	beam-defining clipper
5.1	power supply: 24VAC,7A
5.2	inherent filtration : 2.0mmAL/75KVp
5.3	it is easy to turn on and off, flexible and reliable. It makes different sizes of rectangles exposure field in accordance with various requirements in practice.
6	others
6.1	high voltage cable:≥8m

Packing list

NO.	nae	unit
1.	X ray tube holder	one set
2.	sternum stand	one set
3.	filming bed	one set
4.	X ray tube	one set
5.	Beam-defining clipper	one set
6.	high frequency and pressure X ray generator for medical diagnostic use	one set
7.	operating console	one set
8.	high voltage cable	two faculties