Product use: suitable for the production of large quantities of factories and warehouses, can be used for food, sugar, salt and other food, fertilizer, chemical products, metal powder, ore and other items canvas bag, sacks, flour bags, woven bags, paper bags The sewing and nut are the standard which is easy to be purchased on the domestic market.There are simple and easy to adjust, The machine shell is made of aluminum alloy die - casting process with good mechanical properties.

1. Sealing machine use range and performance:

Large factories and warehouses for the food, sugar, salt, food, fertilizer, chemical products and other items canvas bag, sacks, flour bags, woven bags, paper bags of the package work.

The machine is sewn single chain chain stitch, with a beautiful, strong package, flexible, unpacking the advantages of convenience.

2. Introduction of the structure of the charter

GK9The type of sealing machine is compact, easy to adjust and easy to repair.Tail and nut are easy to purchase standard parts on the domestic market.The machine shell adopts aluminum alloy die casting new technology, has good mechanical properties.

The main technical parameters

Model: GK9-2 Spindle speed: 800 r / min Pitch: 6-8MM Adjustable suture specifications: 2 * 3 shares Packet line motor power: 90W Gross weight, net weight: 4.5KG / 3.8KG

Fourth, the use of sealing machine and adjust the method:

Sewing charter operation method: sewing charter operation method is simple, as long as the line put on, filed machine alignment to sew bag, press the switch to the seam package work.

(A) of the needle exchange

(1) Turn the handwheel clockwise to move the needle to its highest position 8X10Mm double-headed wrench to loosen the needle clip nut, you can pull out the needle, put on a new needle, the needle must pay attention to the direction of its trough out, the gap inward, Tighten the needle clamp nuts at the top of the needle.

(2) Threading step

Pull out the thread on the wire frame, through the wire on the back of a hole and the hole, around the pressure plate, and then into the C hole, through the needle bar after the tail hole, along the panel down from the needle Of the trunking positive penetration needle needle hole, pull out unclear about 90~100Mm thread, you can sewing.

Illustration:

(3) Line specifications and line selection methods

The machine is intended for use 21S/12~18Strand or nylon thread, etc. The thread is to be wound on a cone-shaped spindle, which is fixed with a wire-nail cap after being put in the bushing, but the thread which is spun into the fiber must meet the following requirements. You can ensure that the sewing performance should be. Users want to be selected when the suture attention.

1. Suture should be consistent, uniform thickness, no scarring and knot.

2. Soft and smooth surface, no hair, and have a certain toughness and tension.

3. Twist uniformity can not have a large coexistence.

(4) Suture pressure adjustment

The size of the suture is the main factor affecting the tightness of the stitches.If the suture pressure is too weak, so that after sewing the line braid loose weakness. Bags after the bag is easy to produce loopholes, if the suture pressure is too strong So that the lack of flexibility in the bracelet so that the mouth of the crease, when bear a larger momentum, the line will be broken braid and scattered packets.

Suture pressure adjustment principle, the thickness of the tight seam should reduce the pressure on the thin seam material should increase the pressure in use need to increase or decrease the suture pressure, as long as the tightening or loosen the back of the pressure line nut.

Five. Packet machine needle and crochet of mutual correct position

The mutual position of the needle and the crochet is correct or not, which directly affects the sewing performance of the machine.

1. Needle down to the lowest point, the crochet needle and needle center distance 3.5±0.2Mm

2. When the crochet hook into the needle thrown by the coil ,The crochet plane is in close contact with the notch plane of the needle ,The gap in the 0.1~0.18Mm ,The distance between the lower part of the crochet tip and the upper part of the needle thread hole is 2~2.5Mm .The distance between the top of the crochet tip and the bottom of the needle plate is 2~2.5Mm

3. Crochet stopped at right ,When the needle falls into the loop of the crochet ,Crochet back and needle center distance 1.5±0.2Mm

six .A Method for Adjusting the Location of Needle and Crochet

(1)Head from the bottom of the needle plate in general 2~2.5Mm ,When the hook hex screws (65)Loosen ,Can be crochet Down ,To be adjusted ,Tighten the inner six screws firmly.

(2)Crochet and machine needle mobility ,When the gap is too large or when the needle ,You can loosen the hexagon nut and the hexagon nut, and screw in or out of the set screw .The gap can be reduced or increased ,When the adjustment is completed, the hex nut must be tightened tightly.

Seven .Adjusting method of feeding height

The height of the surface of the needle plate exposed by the feed teeth is determined by the nature and thickness of the seam material. 1.5~2Mm. Feeding teeth after the tooth tip wear, often resulting in a normal feeding, repair tooth tip or exchange of new feed teeth should be adjusted when the feeding plate exposed tooth plate height.

Adjust the method: turn the hand wheel to the tooth frame at the highest position of the cam will feed teeth into the tooth, screw on the tooth surface in the feed teeth exposed 1.5~2Mm ,Then tighten the screws firmly.

Line cut off the line Braid:

In order to prevent the loosening of the stitches, sealing bag bag, the bag should be left at the two ends 50Mm to prevent the braid from spreading or being drawn off

After sewing a bag in the bag, should continue to lead wire braid, and cut the braid on the cutter, so that before the seam is still left long 50Mm of the wire braid.

Knowledge of the safety and maintenance of the sealing machine

Safety Precautions:

Since the machine is in direct contact with the power supply, the owner must pay attention to safety. Before using the machine, pay attention to the following points:

1. Before use, should first check whether the power supply and the motor provides the input voltage match.

2. For safety reasons, a three-wire power cord with a grounding wire must be used /Yellow a two-color ground wire, and to regularly check the internal wiring and insulation of the machine.

3. When used in wet places, wear rubber shoes and wear insulated gloves.

4. In the cleaning or use, the oil does not flow into the electrical parts.

5. Brush the motor and the cable jacket is worn, the need for timely exchange.

6. Use of environmental conditions, relative humidity is not greater than 85%; Non-flammable gas sites.

7. When the packaging material is conductive properties, please pay attention to safety.

10. Packer maintenance knowledge:

1. When the machine is newly purchased or not used for a few days, the sewing machine oil should be added in all the oil holes in the proper amount.

2. After each shift, the machine must be cleaned, especially the parts of the crochet and the feeding mechanism. When the machine is cleaned, remove the cover and lift the foot for a few minutes in the full capacity of the diesel, then inject the sewing machine oil for several minutes, , And the pot base of grease every three months to change once.

3. Motor brush wear, the timely exchange.

4. When not in use, place the machine in a dry, well-ventilated area and cover with a cloth.

Use the method is to plug in the power, press the button you can use, cut, then some people do not know that with scissors cut, in fact, do not, the back of the iron can cut thread, so very convenient. Refueling in the regular activities of the local refueling, the general oil can also rely on the maintenance of the machine, if you maintain a good life will grow a lot.

About commodities:

OUR product price is not including tax prices.

About delivery:

1.Delivery time: OUR will pay the customer within 48 hours after the successful delivery of products

2.Shipment Preparation: Before shipment, we will test the machine, to ensure product quality, and carefully check the product packaging to ensure that the goods shipped before the intact.

3.A product generally used express delivery, logistics and transport more than a wholesale, specific modes of transport can contact us

about delivery:

1.What Express: the default delivery every day.

2.Express Transportation: Because the products are heavy goods, courier transport may cause damage to the way, so customers receive the goods must be carefully checked, if damaged directly rejected, and contact us. , There is any need to find a damaged product replacement, freight borne by the customer.