First, product overview:

AB (Three-phase )Series of machine cooling pump for the vertical installation of the motor and single-stage centrifugal pump together as a whole new pump, with the appearance of the United States, small size, low noise, overload and so on. 50Hz or 60Hz (Single-phase voltage 220~240V) 380~420VAny three-phase, single-phase machine tool cooling pump. Can be used for machine tools or other equipment to do the use of circulating cooling lubricating fluid. Coolant is generally saponification solution, emulsion, Soda water, light minerals and other liquids that are not severely corroded.

Second, the product features:

1, The overall pump with aluminum alloy cast, lightweight and durable.

2, The use of fully enclosed special bearings. Built-in high-quality grease, running smoothly.

3, Impeller equipped with a new rubber seal and the use of special design, can effectively prevent the liquid overflow into the motor inside.

4, The pump can deliver a certain viscosity of the liquid (such as oil, etc.).

Precautions:

1 The pump is started directly at the rated voltage

2 The pump is operated continuously at the rated power under the following conditions of use: altitude not exceeding 1 0 0 m, cooling medium temperature not exceeding +40 degrees, the dragged load not exceeding the rated power

3 Inspect the winding of the pump before use to ground and winding insulation resistance between each other should not be less than 10 megohm, such as below should be dry.

4 electric pump should be stored in the dry air and no harmful gases into the Treasury.

5 electric pump should be kept clean, the bearings cleaned once a year, and replace the bearing grease.

6 pumps should be transported soapy water, soda water, emulsions, light minerals, and no serious corrosive other liquids.

7 pump used to find too little flow and abnormal rotation direction should be shut down at any time to check excluded

8 Check the rotation of the shaft before use is flexible with or without turning dull or impeller rub phenomenon

9 The direction of the pump should correspond to the direction of the arrow on the top cover, and vice versa.

1 0 Use the installation, should not affect the ventilation of the motor cooling.

1 1 must be reliably grounded, electric pump power when not moving, just in case.

Buyers before buying /Tips

Tips: For your shopping pleasure, please be patient to read the following notes and statements, when you buy our products, the default acceptance of the following agreement

About commodities:

OUR product price is not included in the price.

About delivery:

1.Delivery time: OUR will pay the customer within 48 hours after the successful delivery of products

2.Shipment Preparation: Before shipment, we will test the machine, to ensure product quality, and carefully check the product packaging to ensure that the goods shipped before the intact.

3.A product generally used express delivery, logistics and transport more than a wholesale, specific modes of transport can contact us

about delivery:

1.What Express: the default delivery every day.

2.Express Transportation: Because the products are heavy goods, courier transport may cause damage to the way, so customers receive the goods must be carefully checked, if damaged directly rejected, and contact us. , There is any need to find a damaged product replacement, freight borne by the customer.