Product parameters:
This factory is the formal registration of factories
Billings 17% sales tax vote, trading companies are welcome to negotiate ordering! Large quantity of excellent prices!

Please contact Miss Chu to discuss factory, Tel: 13802210103
=======
Real film renderings:







Product parameters:
Image sensor: 1/4 CMOS
Lens: F=2.1MM
TV Online: 420
Wide angle: 170 degrees
Resolution: 656*492 (NTSC)
Ruler: guides
Minimum illumination: 5Lux
Operating voltage: 12 (v)
Operating temperature:-20 degrees centigrade-80 degrees centigrade
Output line: power supplies, signal lines and ground
Video output: composite video cable (75 Ohm)
Operating temperature:-20 ¡æ ~+80 ¡æ, RH95%
Storage temperature:-40 c ~+100 c, Rh95%
Waterproof index: Ip66
Note: waterproof, shockproof, high temperature and high humidity
Other: auto white balance
★ ★ Performance characteristics
General troubleshooting
Symptoms | Reason | Troubleshooting
Picture jitter | Fixation in the pines | Adjust and sturdy
No image | Connection cord plug not plugged in or the system circuit breaker | Check that the plug is inserted, system wiring for fracture
Fuzzy picture | The camera lens is not clean | Clean the lens
Screen diagonal | Cameras did not install | Adjust the camera bracket

More products are welcome, a large quantity of excellent prices Oh ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~







Contact:
Zhu: 13802210103
Website: www.luanbao.NET
DIY-special car camera installation guide
Installation is very simple, please follow me! I wish you success!
First step: remove the original license plate light.
Step two: connect the 3 wires---car special car camera connection instructions:
1. red and black thick line power supply--------camera reversing lights (bright lights while hanging reverse gear).
2. the yellow video cable---the reversing camera video----host video input (rearview V-IN).
3. red and black thin line---power supply----original license plate light camera license plate light electrical wiring.
The third step: test no problem, special cameras will be fixed (pushed).
At this point, the camera installation is complete! Did you succeed?










Matters needing attention
L, the microelectronics products, follow the national standards installation, operation, use.
2, suitable for 12V car electrical system cannot be installed in 24V electric cars.
3, the part of continuous use and then provides a dedicated connection.
4, at installation time should be taken to prevent crushing, puncture, cut, extend the connector.
5, please power off the system installation, maintenance.
6, daily maintenance, maintenance carried out by the manufacturer or a professional.
7, this product is not connected with the braking device, parking assist, parking accidents occurring as a result of product manufacturer not liable for obligations.
Notice to buyer
1, do not disassemble the device without permission stickers site, otherwise no warranty.
2, if you need invoice, please indicate open tickets.
3, is experiencing technical difficulties, please try to contact us during business hours, so that we can first make a detailed reply.
4, buyers please test after receipt of goods, without any doubt, please confirm payment within three business days, or as waiver of service.
5, 7 days after the returned package, the company does not accept non-return quality reasons (according to our return policy implementation of the prototype of the prototype), but normal service.
6, if you feel our service is also good, quality is stable and reliable, please give us praise, your praise is our increasing motivation. If you can spare some time, comments we write one or two sentences, it is of great encouragement to us, we will be happy to serve you.
In order to give customers more confidence in the use of our products, we decided from now on, provide a single free testing of the prototype. Procedures are as follows: customers pay prototype, and in the note callout for ' prototype ', our prototype to the customer, offers 15-day prototype test. If the customer is not satisfied with the prototype effects (Please keep the prototype and packaging in good condition), can be returned to us, our commitment will prototype a full refund to the customer within 3 business days (round-trip shipping costs borne by the customer). (PS: If the customer test the prototype for more than 15 days, you automatically become the sales, we provide regular after-sales service products, see terms of service for details.)