Product parameters:
The factory is a formal registered factory
Can be issued 17% value-added tax votes, welcomed the majority of trading companies to negotiate orders!

Welcome to contact Miss Zhu to see the factory, Tel: 13802210103
====
Product acessories: 7-inch high-definition car display * 1, bus infrared night vision camera * 1, video cable 10m * 1, power line 1.2m * 1.
The video cable is also 12m, 15m, 20m. Need to lengthen the video line, please contact customer service to change the price! This paragraph for the av lotus head, for aviation head please contact customer service.This reversing image can be used for bus, Engineering vehicles, agricultural vehicles, harvesters and other vehicles reversing and monitoring.
Product Image:












Product parameters:
| Screen size:7 inch |
| Display Mode:16:9 |
| Pixels: 800 × 480 × RGB |
| 2 video inputs |
| Auto-switch when reversing |
| Display mode can be switched By remote control |
| Operation temperature:-20Lt; 0 & gt; C~ +75Lt; 0 & gt; C |
| Power supply:DC 12V |
| Blue Screen if No Signal |
| System:PAL / NTSC |
◆ Features:
Two video inputs can be applied to DVD, Rear view, front, side view camera connection. Can automatically switch the rear view and automatic wake-up function;
◆ automatic reversing switch
Power on state: reversing automatically switch to the camera display screen, after reversing automatically switch back to the previously played screen;
Shutdown state: reversing the car when the boot automatically after the scene, automatic shutdown after reversing;
◆ full-function card remote control, OSD full English menu;
◆ beautiful appearance, stable performance, image clarity, color, simple operation.
Can be connected reversing system, reversing, the display signal will automatically wake up, display car image reversing complete automatic shutdown, more humane
★Performance characteristics ★
CMOS with infrared fill light camera Features:
1. Using CMOS II generation A-level image sensor with infrared fill light.
2. With infrared fill light, full color during the day, better clarity, the night mainly by car taillights and infrared lights fill light, night vision is very clear.
3. Alloy structure, strong security waterproof.
4. The factory after high-pressure immersion test and 12-hour power-on aging test.
General troubleshooting
Symptom | Cause | Remedy
Picture jitter | Fixed support loose | Adjusted and sturdy
No picture | Plug is not plugged in or system cable is disconnected | Check if plug is plugged in and system cable is disconnected
The camera is not clean | clean the lens
The camera is not installed | Adjust the camera stand
Truck dedicated camera:
◎ photosensitive components: high-definition import chip
◎ can be infrared night vision, a photosensitive element, automatically open the night infrared camera.
◎ Pixels: 628 x 582
◎ Resolution: 420 TV line
◎ Minimum illumination: 1.0 lux
◎ lens: 6 mm
◎ Standard: PAL / NTSC
◎ Video output: 1.0Vpp composite video at 75 ohms
◎ Working temperature: -20 - 50 deg. C
◎ Power: DC 12-24V can be less than 1000mA
◎ Material: ferrous metal shell.
◎ viewing angle of 120 degrees wide angle
Contact information:
Miss Zhu: 13802210103
Website: Www.luanbao.net









Precautions
L, the product microelectronics products, according to the relevant national standards of installation, operation, use.
2, adapted to 12V automotive electrical system, can not be installed in 24V electrical models.
3, the continuity between the various parts please use the special line to provide the connection.
4, in the installation should be careful to prevent flattening, piercing, cutting, extension of the cable.
5, the system installed in the power failure, maintenance.
6, routine maintenance, maintenance by the manufacturers or professionals.
7, this product is not connected with the vehicle brake device, only for parking assistance, such as parking accidents occurred, the product manufacturers no obligation to bear legal responsibility.
Buyer Information
1, do not privately demolish the equipment sticker parts, or not warranty.
2, for billing, please indicate what kind of votes.
3, if you encounter technical problems, please contact us as much as possible during working hours, so that we can make the first time a detailed reply.
4, the buyer received the goods after the timely detection, if there is no doubt, please confirm payment within three working days, or as a waiver of after-sales service.
5,7 days after the package returned, the company does not accept the reasons for the return of non-product quality (prototype prototype implementation of our policy returns), but to give normal after-sales service.
6, if you feel that our service is also good, stable and reliable quality of equipment, please give us timely praise, your praise is our continuous improvement of motivation. If you can take a little bit of time, write for us Reviews, it is a great encouragement to us, we will be happy to help you.
In order to allow customers more confidence in the use of our products, our company decided to provide a single prototype free trial. The process is as follows: the customer first to pay the prototype, and marked in the remarks as 'prototype' Customers, to provide 15 days of prototype testing. If the customer is not satisfied with the prototype effect (please keep the prototype and packaging intact), can be returned to Division I, our commitment to 3 working days will be fully refunded prototype models to customers (PS: If the customer test prototype period of more than 15 days, then automatically converted to sales, I provide the Secretary for the normal product after - sales service, see the terms of service after - sales service.