The factory is the formal registration of the factory, you can open 17% of the value-added tax votes, welcomed the major trading companies or wholesalers contact advice!

Welcome to contact Miss Zhu negotiate to see the factory, Tel: 13802210103 QQ: 2355839630

Camera includes: Camera 1 + 1 power cord + 1 video cable

--

High-end CCD image sensor: 1/4 'Super sharp CCD Image Sensor
Appearance size: Φ22mm × 59mm
Standard: PAL / NTSC (optional)
Resolution: PAL: 512 (H) × 582 (V) / NTSC: 512 (H) × 492
Image area: 9.6 um x 6.3 um
Resolution: 480 TV lines
Illumination: 0.2Lux F / 1.8
Lens focal length and viewing angle: 170 degrees wide angle

Video output mode: CVBS 1.0Vp-p, 75 ohm
Synchronization mode: internal synchronization
Synchronous frequency: 15.625KHz / 50Hz (PAL)
Signal noise ratio: 50dB or more (AGC-OFF)
Automatic gain control: up to 36dB
White Balance Adjustment: Auto (2500 ~ 9500K)
Backlight compensation: Yes
Gamma characteristics: γ = 0.45
Waterproof rating: IP-67
Operating voltage: DC 8-12V
Operating temperature: -20 ℃ ~ +75 ℃ (RH95% Max.)
Storage temperature: -40 ℃ ~ + 85 ℃ (RH95% Max.)

Shipping instructions:

Guangdong Province to support cash on delivery, the provinces do not support Thank you.

Can be customized before or after the car, or whether to electronic scale.

about delivery: Small pieces of hair rhyme, less than please tell or since mention, large pieces of Debon logistics, thank you.

Installation Notes:

for reference only

DIY - car dedicated car camera installation guide

Installation is very simple, please learn with me! I wish you success!

The first step: remove the original license plate lights.

The second step: pick up the three lines --- car dedicated car camera wiring instructions:

1. Red and black lines --- camera power supply ----- then turn the lights (that is, when the lights connected to the inverted lights).

2. Yellow video cable --- camera video ---- then the host of the reverse video input (reverse view of the V-IN side).

3. Red and black lines --- camera license plate power supply ---- then the original license plate power supply lines.

The third step: test no problem, the car dedicated camera fixed (press the original position can be).

At this point, the camera has been installed! Are you successful?

Precautions:

1, Can not rely entirely on the reverse rear view system reversing ,But only as a reversing of the auxiliary tool.

2, The car display must be properly connected ,If the display is not provided AV Input interface, you must find the appropriate video cable or install video switching device, so that the normal image display.

3, Do not easily connect the car battery electrical power directly to the car battery power, so as not to cause power instability, or burn things!

Product packaging and accessories:

A variety of optional ~ ~ ~ can also be customized according to guests Oh:)

Default hair color box Oh, need 4S packaging and brand packaging, please explain with Miss Zhu.

Contact information:

QQ: 2355839630

Website: Www.luanbao.net

Company Qualification:

More Products ~ ~:

Products:

OV7950 / PC1030

Modelling advantages:

According to the car without destroying the original style design, structure, and automobile car perfect combination.

Special technical parameters:

Imaging device: OV7950 / PC1030

Imaging 4.080 area: 3.102 mm mm *

Field of view: 170 degrees

Optical lens: EFL = 1.8 mm

Pattern: NTSC

Resolution: 656 * 1191

30fps: 1 ratio

The minimum light: 0.3 Lux

Working voltage: DC12V (+ / - 10%)

60mA: working current

Video output: RCA interface, 1.0 Vp - p, 75ohm

Signal-to-noise ratio: more than 48dB

Working temperature: - 20 ~ + 85 degrees, RH95%

Housing materials: aluminum alloys, seismic resistance, wear-resisting, high and low temperature resistance

Waterproof IP68 level: the waterproof design and strict testing water