AC cam controller model range of manufacturers supply, many models have, contact customer service: 13587450647 or Miss

Use, work conditions and model significance
1.1KT14Series Cam controller (Hereinafter controller )For the exchange of 50HZ Voltage to the 380Volt circuit ,Mainly as a crane AC motor starting and directional purposes. This controller has a reversible symmetry circuits, translation mechanism applicable to cranes and lifting equipment, also can be used as properties of the same type of motor starter, commutation and adjusting purposes.
1.2KT14-25J/1, KT14-60J/1Controller to control a three-phase-wound type induction motor.
1.3KT14-25J/2, KT14-60J/2Controller for simultaneous control of two three-phase-wound type induction motor.
1.4KT14-25J/3Controller to control a three-phase squirrel-cage induction motors.
1.5KT14-60J/4Controller for simultaneous control of two three-phase-wound type induction motor without contact with stator circuit.
1.6Controller's normal working conditions: altitude is not more than 2500Here metres; Ambient air temperatures up to +40℃A minimum of -25℃; Air relative humidity is not more than 90%; No significant where the shake and shock and vibration; In non-hazardous media, and media without enough to corrode metal and damage to insulation of gas and dust (includes conductive dust); No invasion of rain and snow in places.
1. 7Type means:

1. Structure

2.1Controller shell for protection.
2.2Controllers contact system for double breakpoint, direct-acting, arc-extinguishing systems using a closed-end longitudinal seam of clay interrupter, and with a strong magnetic blowing circuits, arc-quenching ability.
2.3Contact system structure as a building block box, double-row arrangement, easy installation, compact easy.
2.4Contact closing and disconnecting by virtue of bakelite cam plates which form different angles by Rotary mode.