Product parameters:
- Type: LED lights with
- Brand: than Ruite
- Model: BRT-SFN-W60-5610
- Input voltage: 12
- LED chip brand: three security photoelectric
- LED lamp beads Model: 5630
- LED lamp beads number: 60
- Single lamp beads lumens: 50
- Beam angle: 120
- Power factor: 21.6W
- Circuit board material: double - sided rolling copper FPC
- Can dimming: No
- Effective life: 50000
- Size: 1000 * 10
- Certification: 3C, ce, ROHS
- Use range: lighting lighting
- Color temperature: 3000/4000/6000
- Light color: warm white










LED3528 soft light strip is LED light as the light source, the FPC circuit board as the carrier, the circuit string with the appropriate current limiting resistor design and production of decorative lighting. With high brightness, soft and flexible, And other advantages. LED3528 soft light in the light source for the LED3528 lamp beads. SMD is SMD type, the carrier is a soft FPC board. That flexible circuit boards, most of the width of 8MM, thickness less than 1MM. 0.5 m. Can be two or several welding each other. Production of good LED3528 soft strip factory length of 5M a roll, anti-static discs and anti-static bag, easy to carry and transport. LED3528 soft light from the following :
1. Color: FPC colors are mainly yellow board, white board, blackboard, customizable. LED light color: white, warm white, red, yellow, blue, green, purple.
2. Waterproof level: light bar to be applied to different locations, waterproof grade is not divided into waterproof, Dijiao waterproof casing waterproof.
3. The number of lamp beads: FPC can be affixed to a number of LED3528 lamp beads, so in each meter FPC, the number of lamp beads 30 meters per meter, 60 lights per meter, 120 lights per meter three conventional to brightness requirements LED3528 soft light strip for a wide range of its different types of products applicable to showcase, store door head decoration, ultra-thin light box backlight, hotel KTV decoration, outdoor lighting, home ceilings, ceiling decoration. LED3528 soft light of the power supply for the DC 12V, it must be equipped with 12V DC switching power supply, after calculating the length of each connection to calculate the power of the light bar, and then equipped with 20% higher than the light power switch Power, the best proposal is that each light bar length of 4 meters is appropriate, from the switching power supply DC output of a line of power supply, LED3528 light work itself has some heat, it can not be installed in the high temperature s position. Bi Ruite only assured people products!
New Products New Specials .................. Look forward to your order