Model Number: 1050

Precautions

1, avoid the case of no water in the bathtub to start the motor and air pump, be sure to the water tank full before the nozzle can start

2, each use of the bathtub, please put cold water after the release of hot water;

3, the bathtub to open the packaging connected to the sewer pipes, bathtub stability and to extend the life of the bath, the proposed edge of the bath and the walls and the ground contact with the place of neutral glass white plastic glass, can effectively maintain the bottom of the tub dry, Extended service life;

4, please pro before buying a good water and electricity in the bathtub position to avoid improper installation after the purchase situation

5, the installation of glass glue is best to use neutral porcelain white, so as to avoid the glass glue acid and alkali to the acrylic surface corrosion, porcelain white is closer to the bathtub body color clean, uniform color closer to more beautiful. Glass glue to maintain more than 12 hours after the glass gel to be completely cured and then use better

6. Water capacity: generally full of water capacity of about 230 ~ 320L.When the bath water to no shoulder. Bathtub is too small, in which curled up uncomfortable, too large

The height of the water outlet determines the height of the water volume bathroom When the length is insufficient, select a bath with a larger or deeper depth to ensure that the tub has sufficient water.

7. There are about the skirt: the skirt is divided as follows: in the face of the bathtub facing the wall, if the outlet on the left side of the person, you need to buy the left skirt bath, and vice versa to buy the right skirt bath

8. Should choose a non-slip measures of the tub, especially the elderly use the tub.

9. Firmness: hand press, foot test firmness. Bath firmness is related to the quality and thickness of the material, visual is not visible, need to personally try, there are gravity cases, such as the station into, whether there is a The feeling of sink.

1Ask how about the right skirt

A: The massage cylinder to identify the direction: people lying on the cylinder by the direction of the inside, skirt on the left-hand side of the left skirt, skirt on the right hand side was the right skirt; room series identified direction: Skirt on the left hand side of the skirt, skirt in the right hand side of the right skirt (cylinder block to see the pillow, the body identified to see the seat); customers according to their own bathroom Direction to choose from the appropriate direction of the product to facilitate the display.

2Asked how the sand - silver?

A: The light silver aluminum material is polished, the surface similar to the stainless steel shiny, and some manufacturers also called bright silver; sand silver spray treatment, hand touch similar to the feeling of fine sand, hence the name silver sand.

3What kind of housing cylinder can be equipped with massage cylinder?

answer: 1.2Meter long high-cylinder, you can install surf massage.

4What is a steam room?

A: With the top spray, dome light, radio, back acupuncture massage, hot and cold water adjustment switch common acrylic shower room collectively referred to as the overall room, the installation of steam function of the house collectively referred to as the steam room.

5What is the water cylinder?

A: equipped with control of hot and cold water conversion, shower spray, the waterfall and hand-operated or foot pedal to the water device called the water tank; install the motor, pneumatic switch and surf the size of the adjustment known as the massage cylinder.

6What configurations can be added to the massage cylinder?

A: The general massage cylinder can be equipped with computer control to make it more comprehensive and powerful; can be installed bubble bath or lantern bubble bath to make it more choices, more romantic; can be installed LCD TV to Tim More noble enjoyment.

7What is the pattern on the glass?

A: Customers can light on the basis of glass, silk screen patterns (pictorial images can be free to choose).

8What if the product leaks?

A: Due to long-distance transport bumps, or other causes of massage cylinder bottom leakage, should carefully check the leak location, usually nozzle or PVC Hose connector bit. Nozzle nozzle water leakage should be removed, re-playing glass glue fixed, pending 24Hour can be completely melted after use; hose leaks are available 502Glue into the gap, can be re-used after full solidification; body installation should be in the aluminum and acrylic sheet contact with glass glue to prevent leakage.

9What happens to a computer controller or a motor failure?

A: First check the power supply, power plug and leakage protection switch, such as plug water and other reasons lead to tripping is not power, can be blown dry, press the leakage protection switch, you can use; in the case of other failures within a year Manufacturers can be free trade-in, a year later by cost of fees.

Welcome to contact us