Have to teach you the faucet Buying method:

Look at the appearance

Good faucet surface chrome plating process is very particular about, generally after several processes to complete. Distinguish the faucet is good or bad depends on the degree of light, the surface is smoother the more representative of the better quality.

Turn the handle

Good faucet in turning the handle, the leading and the switch between the gap is not excessive, and off open easily, do not slip. Can not only poor-quality faucet gap, blocked a sense of big.

Listen to the sound

The leading material is the most difficult to distinguish.The good leader is the overall cast copper, beat up the sound boring.If the sound is very crisp, it must be stainless steel, the quality will be a poor grade.

Kitchen Faucet Products:

Our production process:

Have to teach you the leading daily maintenance tips:

1.Install a faucet in the new house, you must first release the water in the pipeline to clean the sand and gravel impurities.

2.High-end faucet must be experienced and qualified professionals to install, install the lead can not bump with hard objects, can not touch the cement, glue, paint and other wear and tear,

Corrosion, corrosion of the faucet surface of the object.

3.Long after a long time, the water may be reduced, you can use a special tool to unscrew the bubbler, clean the filter and then carefully installed.

4.Light to open the light off is particularly important, any reckless, deliberately straining behavior are likely to damage the seal leading to failure.

5.Lead to always use a soft cotton and water to clean, to ensure the leading glossy, try not to wash liquid cleaning, absolutely can not use corrosive acid solution.

Have to teach you to deal with water leakage method:

In normal life, sometimes you will find the tap after the water will still drip in the tightening, but also from the tap at the exit or a drop at the junction,

Not only caused a lot of waste, and sometimes its sound will cause some trouble.In fact the structure of the faucet is very simple, leak repair is entirely self-repair,

In general, the problem of leakage as long as the shaft into the faucet within the gasket or triangular gasket seals and other types of parts, can be resolved.But before the renovation

Turn off the main faucet switch at home.

As for the leakage repair of the faucet joint, the cause of water leakage is nothing more than the damage of the sealing tape of the tap part (fixing screw)

Remove the faucet, in the fixed screw place to re-roll the new water-stop tape can be, the following steps for the maintenance: First, first tap tightly, with a wrench to the faucet to

Counterclockwise to remove the second way, the screw hole out, in the threaded part of the tape with the wind on the clock roll 5-6Back.

To see if there is adjustment of the tap tap water clockwise tied to the clockwise direction, the final installation is complete, open the master switch to try to confirm to see if it will leak.

Contact us.