Coating Thickness Gauge | CM-1210A Iron-based. Aluminum dual-use split sensor coating thickness gauge

Coating Thickness Gauge | CM-1210A Iron-based. Aluminum dual-use split sensor coating thickness gauge

1680 CNY (244.62USD)

add to cart

Product parameters:

  • Processing customization: No
  • Type: Coating Thickness Gauge
  • Brand: Domestic
  • Model: CM-1210A
  • Measuring range: 0 ~ 2000 um
  • Power supply voltage: 4 batteries on the 7th
  • Dimensions: 140 x 72 x 34 mm


Non-ferromagnetic coatings on steel, iron and other ferromagnetic metal substrates by magnetic sensors, coatings such as paint, powder, plastic, rubber, synthetic materials, phosphating, chromium, zinc, lead, aluminum, tin, Cadmium, porcelain, enamel, oxide, etc .. Eddy current sensor for copper, aluminum, zinc, tin and other substrates enamel, rubber, paint, plastic layer, etc .. Widely used in manufacturing, metal processing industry, Detection areas.

* Iron-based and non-iron-based coating thickness gauge.
* With a single and continuous measurement of two options.
* Metric / Imperial conversion.
* Has a manual shutdown, automatic shutdown and under voltage tips and other functions.
* Automatic memory calibration value and automatically identify the measured material matrix.
* The buzzer beeps during the operation.
* Uses the USB data line output, the RS-232C data connection line and the software and PC communication.
* Optional Bluetooth ™ data output option is also available.
* Split, providing a variety of probes, measuring more mobile.

Measurement methods F magnetic induction / NF vortex
Measuring range 0 ~ 2000 um (other measuring ranges can be ordered)
Resolution 0.1 um / 1 um
Minimum surface F: convex 1.5 mm / concave 25 mm N: convex 3 mm / concave 50 mm
Minimum measuring area 6 mm
Thinnest substrate 0.3 mm
Accuracy ± 1 to 3% n or ± 2.5 μm
Automatic shut-down
Metric / imperial Optional
Battery voltage indication Low voltage indication
Working conditions Temperature: 0 ~ 40 ° C, humidity: 10 ~ 90% RH
power supply 4 on the 7th battery
size 140 x 72 x 34 mm
weight 215 g (without battery)

Standard accessories:

1. Host .......................................... 1 set

2. Probe (iron-based & eddy current) ........................ 1 piece

3. Reference block (iron / aluminum) CTG-BS ........ each one

4. Calibration diaphragm CTG-CF ................... 1 set (4 pieces)

5. Carrying case ....................................... 1

6. Instructions 1

Optional accessories:

1. USB, RS-232 line and software

2. Bluetooth communication and software