Structure and use

* A small, lightweight, accurate portable hardness tester.

* Instruments by CType frame, screw and hardness probe.

* Can test the plane or surface parts, parts as long as they can be clamped, and the measured surface perpendicular to the indenter can be tested.

* For the production of inspection and acceptance inspection, can replace the accuracy of the Richter hardness tester.

Instrument features
* According to Rockwell hardness test principle and test conditions test, the test results are true and reliable.

* The instrument is stuck on the part, clamped after the hardness test, no need to move the parts.

* The test operation is quick, convenient and non-destructive. * If the micrometer is the same, it is accurate, convenient and repeatable.
* If the same desktop test accuracy, error is not greater than 1.5HRC.

Technical Parameters

Initial test force: 10kg
Total test force: 60kg, 100kg, 150kg
Head: 120 ° diamond cone, 1.588mm carbide ball
Indication error: in line with GB / T230.2
Repeatability error: in line with GB / T230.2
Resolution: 0.5HR
Applications: steel, copper, aluminum and other common metals.

Application Notes

* Compared with the small-scale hardness tester, C-type hardness tester adopts the parts clamping mechanism and drum-like reading device like micrometer, good stability, good repeatability and high precision.