Product parameters:
The MD600 600mm rangefinder telescope outdoor telescope

Move the MD Laser range finder (hereinafter referred to as range finder), combined with the ordinary telescope and laser range finder function.

In the observation of objects at the same time, can be measured within a certain distance within the distance of the object, and has a fast distance measurement, display distance intuitive, power consumption, when not used automatically power and so on.

The rangefinder is small, the appearance of the United States, light weight, easy to carry; machine use of a section of the machine. 3VBattery, easy to replace. Use 'RAIN 'Mode, timely rain does not affect the distance; use'> 150' Mode, can eliminate the short distance wire, Branches and other small targets.

The range finder is widely used in golf, hunting and other sports, outdoor activities, distance measurement; also widely used in poles, bridges and construction site distance measurement; also used for general terrain measurements, warehouse measurements.
The appearance of the range finder is shown in Figure 1.

2.1Distance range: 5m~600m
2.2Distance measurement: semiconductor laser ranging (harmless to the human eye)
2.3Distance error: ±1m±0.1%;
2.4Ranging display mode: within the field of view LCD display;
2.5Effective objective lens diameter: 30mm;
2.6Membrane: Plating multilayer;
2.7Exit pupil diameter: 3.6mm;
2.8Exit pupil distance: 13mm;
2.9Focus mode :Eyepiece focusing;
2.10Telescope magnification: 8X
2.11in 1000mThe vision for 122 m(Field of view 7°)
2.12Distance mode : RAIN , RELF , > 150,No display (standard mode);
2.13power supply: 3V (Not included)
2.14Dimensions: 148X96X58mm;
2.15weight:230g;
2.16Waterproof: not waterproof.
3.1 symbols and functions
3.3 Distance display: above the field of view, three digits; no distance display: '- - -'.
3.4 Distance units: in the top right of the field of view, with 'METERS' (meters) or 'YARDS' (code) said.
3.5 Ranging mode: the upper left of the field of view, there are four states:
(1) No letter display - standard status;
(2) 'RAIN' - for rainy days, with a target distance> 60m;
(3) 'REFL' - apply to misty days or severe water vapor weather;
(4) '150' - for targets with interference within 150 m (eg wires, branches, etc.), the target must be greater than 150 m at this time.
3.6 Distance measurement quality: just below the field of view, with 'QUALITY ??????????'Said,'?'A number of more, that echo strong, generally show 6, you can display the distance, if less than 6, said the echo is weak, can not show the distance.
3.7 laser emission: in the bottom left of the field of view, with 'LASER' said, when the laser, 'LASER' flashing.
3.8 Battery undervoltage: At the bottom right of the field of view, when 'BATT' is displayed, it indicates that the voltage is insufficient and the battery is replaced.
4 distance operation
4.1 adjust the distance meter eyepiece, so that objects within the field of view clear4.2 Click the 'trigger' button, the mirror shows '', the center circle is aimed at the target, 'mode' is generally placed in the standard state, again press the 'trigger' button for about 3 seconds, the target distance display, if Do not use 15 seconds after the automatic shutdown.
4.3 In order to reliably measure the target, press the 'trigger' button for the second time, for more than 3 seconds, until the target distance display, press the time can not be too long, otherwise it will show the noise generated decimal. There is no distance display, indicating that the target echo quality is poor, then show '- - -'.
4.4 Each time you press the 'Mode' button once, you can change the state. The use of various modes can be selected according to the description of 3.5, when the power is turned on, in the last use mode.
4.5 To perform a distance unit conversion, press the 'Mode' button for more than 3 seconds.
4.6 Rangefinder distance and the nature of the target, the emission beam and the target surface angle and weather visibility, in general, the target surface is smooth, bright, large area, the beam and the target surface perpendicular to the weather The distance between the target surface is rough, dark, small area, the beam is tilted with the target surface, and the distance measured by the fog is close.
5 Use Precautions
5.1 Do not open the rangefinder, so as not to damage the internal circuit.
5.2 Do not wipe the glass surface with your hand. Please wipe it with a special lens cloth. The outer surface is wiped with a soft cloth.
5.3 Do not flip the CR-2 battery. Remove the CR-2 battery when not in use for a long time.
5.4 should be stored in a dry place when not in use.
5.5 should be used in the temperature range of -20 ℃ ~ +40 ℃.
5.6 Do not use two keys at the same time.
6 Annex
Soft package · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Straps · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Wipe the mirror cloth........
User 's manual