Supply of small mouse switch micro switch, MS-004 mouse micro switch 2A125VAC

Supply of small mouse switch micro switch, MS-004 mouse micro switch 2A125VAC

1000+
0.14 CNY (0.02USD)

add to cart

Product parameters:

  • Brand: KSJ
  • Model: micro switch
  • Type: small
  • Breaking capacity: micro-current type
  • Breaking form: single-type
  • Protection performance: dustproof type
  • Use of the environment: ordinary type
  • Rated voltage: 125
  • Rated current: 1
  • Mechanical life: 50000
  • Product Certification: ROHS
  • Processing customization: Yes
  • 3C Rated voltage range: 440V or more









Micro Switch
The microswitch is a contact mechanism having a minute contact interval and a quick-acting mechanism for switching operation with a predetermined stroke and a predetermined force. The switch is covered with a housing and has a switch outside the drive lever because the pitch Small, hence the name micro switch, also known as sensitive switch.

working principle:

The external force exerts a force on the action reed by means of a fretting element (by pin, button, lever, roller, etc.). When the action reed is moved to the critical point, the instantaneous action is generated so that the movable contact The contact is quickly connected or disengaged.When the force on the transmission element is removed, the action reed produces a reverse operating force, and when the transmission element reverses the stroke to the action point of the reed, the reverse action is instantaneously completed. The micro-switch has a small pitch, short stroke, small power, and quick release, and the moving speed of the movable contact is independent of the speed of the transmission element.

Precautions when using:

1When fixing the switch body, use a small screw of M2 to fix it on a smooth surface at a torque of 0.098 N · m or less, and to prevent loosening of the screw, it is recommended to use a washer.

2. Please note that in the free state, the actuator should not exert force directly on the button or actuator.

3. After the operation, set the value to 70% or more of the O.T. value. When the switch is in the position, do not set the operating body to the operating limit position.

4. A change in operating characteristics shall not cause a malfunction even if a variation of ± 20% of the operating characteristic specification value is changed.

5. In the case of manual welding, use a temperature-adjusted welding equipment (max. 320ºC) to complete the operation within three seconds and note that the force is not applied to the terminal.

6. It is recommended to use a low power circuit type (AU cladding contact) when used under a small current voltage.

7. In the use of attention to the surrounding environment, should not be too wet and so on.

Product use range:

Electronic products. Such as: computer mouse, car mouse, automotive electronics, communications equipment, military products, test equipment, gas water heaters, gas stove, small appliances, microwave ovens, rice cookers, float equipment, medical equipment, building automation , Power tools and general electrical and wireless equipment, 24-hour timer and so on.