Factory direct mouse micro switch WK1-01 | Handheld mouse switch

Factory direct mouse micro switch WK1-01 | Handheld mouse switch

1000+
0.1 CNY (0.02USD)

add to cart

Product parameters:

  • Brand: KSJ
  • Model: Micro switch
  • Type: Small
  • Breaking capacity: micro current type
  • Split form: single type
  • Protective performance: dustproof type
  • Use of the environment: ordinary type
  • Rated voltage: 125
  • Rated current: 1
  • Mechanical life: 50000
  • Product Certification: ROHS
  • Processing customization: Yes
  • 3C rated voltage range: 440V or more









Micro Switch
The microswitch is a contact mechanism having a small contact interval and a quick-moving mechanism for performing a switching operation with a predetermined stroke and a prescribed force, covered with a housing, and a switch having a drive lever on the outside thereof because the contact point pitch of the switch Small, hence the name micro-switch, also known as sensitive switch.

working principle:

The outer mechanical force acts on the action reed through the micro-actuating elements (pin, button, lever, roller, etc.). When the action reed moves to the critical point, When the force on the transmission element is removed, the action reed will produce the reverse action force, and the reverse action will be completed instantaneously when the reverse stroke of the transmission element reaches the action point of the reed. Micro-switch contact distance is small, short stroke, according to the power of small, on-off quickly.The moving contact action speed and transmission component speed has nothing to do.

Note:

1When fixing the switch main body, use a small screw of M2 to fix it on the smooth surface with a torque of 0.098N · m or less, and to prevent the screw from loosening, it is recommended to use the washer at the same time.

2. Please note that the free state of the action body should not be directly on the button or actuator force, the use of the button should be applied in the vertical direction of the power.

3. When the action is set to 70% or more of the O.T. value, do not set the action body to the operating limit position so as to avoid the opening and closing of the impact.

4. Changes in operating characteristics shall not cause a malfunction even if a change of ± 20% of the operating characteristic specification value occurs.

5. In the case of manual soldering, use a welding device with a temperature adjustment (max. 320ºC) to complete the work in three seconds and not to apply force to the terminal during operation.

6. It is recommended to use a low-power circuit type (AU cladding contact) for use at a very small current and voltage.

7. In use, pay attention to the surrounding environment should not be too wet.

Product range:

Electronic products, such as: computer mouse, car mouse products, automotive electronics, communications equipment, military products, test equipment, gas water heaters, gas stoves, small appliances, microwave ovens, rice cookers, float equipment, medical equipment, building automation , Power tools and general electrical and wireless equipment, 24-hour timer and so on.