Factory direct high-quality mouse micro switch micro switch | miniature mouse micro switch KW-10 Figure

Factory direct high-quality mouse micro switch micro switch | miniature mouse micro switch KW-10 Figure

1000+
0.14 CNY (0.02USD)

add to cart

Product parameters:

  • Brand: KSJ
  • Model: micro switch
  • Type: small
  • Breaking capacity: micro-current type
  • Breaking form: single-type
  • Protection performance: dustproof type
  • Use of the environment: ordinary type
  • Rated voltage: 125
  • Rated current: 1
  • Mechanical life: 50000
  • Product Certification: ROHS
  • Processing customization: Yes
  • 3C Rated voltage range: 440V or more








Micro Switch
The microswitch is a contact mechanism having a minute contact interval and a quick-acting mechanism for switching operation with a predetermined stroke and a predetermined force. The switch is covered with a housing and has a switch outside the drive lever because the pitch Small, hence the name micro-switch, also known as sensitive switch.

working principle:

The external force exerts a force on the action reed by means of a fretting element (by pin, button, lever, roller, etc.). When the action reed is moved to the critical point, the instantaneous action is generated so that the movable contact The contact is quickly connected or disengaged.When the force on the transmission element is removed, the action reed produces a reverse operating force, and when the transmission element reverses the stroke to the action point of the reed, the reverse action is instantaneously completed. The micro-switch has a small pitch, short stroke, small power, and quick release, and the moving speed of the movable contact is independent of the speed of the transmission element.

Precautions when using:

1When fixing the switch main body, use a small screw of M2 to fix it on the smooth surface with a torque of 0.098N · m or less, and to prevent the screw from loosening, it is recommended to use the washer at the same time.

2. Please note that the free state of the action body should not be directly on the button or actuator force, the use of the button should be applied in the vertical direction of the power.

3. When the action is set to 70% or more of the O.T. value, do not set the action body to the operating limit position so as to avoid the opening and closing of the impact.

4. Changes in operating characteristics shall not cause a malfunction even if a change of ± 20% of the operating characteristic specification value occurs.

5. In the case of manual soldering, use a welding device with a temperature adjustment (max. 320ºC) to complete the work in three seconds and not to apply force to the terminal during operation.

6. It is recommended to use a low-power circuit type (AU cladding contact) for use at a very small current and voltage.

7. In use, pay attention to the surrounding environment should not be too wet.

Product range:

Electronic products, such as: computer mouse, car mouse products, automotive electronics, communications equipment, military products, test equipment, gas water heaters, gas stoves, small appliances, microwave ovens, rice cookers, float equipment, medical equipment, building automation , Power tools and general electrical and wireless equipment, 24-hour timer and so on.