High Diamond Drill Mini Steering Mini Stepless Small Drill 4mm

For large quantities, please contact us

Phone 13777681128

QQ: 390326380

Table mini miniature bench drill, stepless speed small bench drill

1, drilling machine with DC, stator direct drive motor,

2, fast, low noise, long life without drilling, drill bit breaking rate is very low.

3, micro-drill chuck range, support from 0.5 ~ 4.0mm diameter drill, is the ideal manual rapid drilling tool.

4, the product structure is novel, lightweight, easy to carry, high motor speed, overload capacity.

Be applicable:

5, can be widely used in the model, mold making, document binding, thin metal soft metal drilling, circuit board processing, such as fine processing 2, non-special hard material drilling processing, hardware processing,

Document binding, electronics manufacturers, school units scientific research experiments, jewelry, jewelry and other industries the ideal tool.

performance:

Rated voltage: 220V Rated frequency: 50 / 60Hz

Rated power: 120W

Drill chuck range: 0.5-4.0mm

Maximum diameter of steel 3.2mm Table size: 105 * 105 mm

Drill base size: 190 * 105 mm

Non-metallic maximum 4mm copper. Aluminum up to 4mm

Speed: stepless speed, speed 10000

Precautions:

1. Be sure to turn off the power before commissioning the unit.

2. After a period of use, should be in the sleeve and axle box hole between the drop of oil to lubricate.

3. Column surface and table surface commonly used oil coating better.

4. Operation to protect the eyes, without gloves, do not bare the body, do not play the tie.

5. To fix the workpiece, prevent the workpiece from rotating during drilling.

6. Use the speed as specified.

Buyer before buying /Tips

Tips: For your shopping pleasure, please be patient to read the following notes and statements, when you buy our products, the default acceptance of the following agreement

About merchandise:

OUR products priced at non-tax price.

About shipping:

1.Delivery time: OUR will be in the customer payment within 48 hours after the successful delivery of products

2.Shipping Preparation: Before shipment, we will test the machine, to ensure that the product qualified, and carefully check the product packaging to ensure that the goods shipped before the intact.

3.A product generally use express delivery, more than the wholesale logistics transport, the specific mode of transport can contact us

about delivery:

1.What courier: the default delivery every day delivery.

2.Express delivery: because the products are heavy goods, express delivery may cause damage on the way, so please customers in the receipt must be carefully checked, if damaged directly rejected, and contact us. If the customer after the receipt and then view the product , There is any damage to the product to be replaced, the freight borne by the customer.