Affiliate marketing, do not delete

This product is Ninghai County West shop Senyang electrical plant Direct sales, not through the dealer, to provide you with high-quality products, high standards of after-sales service, please rest assured customers to buy friends.

Tips: flashlight when you are placed in the child can not touch the place, so as to avoid accidents.

Tips: flashlight when you are placed in the child can not touch the place, so as to avoid accidents.

Light flashlight instructions
A switch instructions
1, the battery for the positive inward (lamp side), the negative outward (tail).
2, the switch in the tail, the switch function is a switch function, light switch is dimming function.
2. circuit board instructions
1, OUR flashlight using advanced constant current technology, can effectively solve the LED flashlight on the constant current requirements.
2, special tips: a. Do not overpressure, the voltage should not exceed 4.2V b. The battery is facing forward, do not reverse, or will burn board c. Note that the control of the torch temperature changes, to ensure heat d. Non-professionals Do not open the circuit board
3, the warranty note: open or deal with the circuit board is no longer warranty coverage.
Three lithium battery instructions
1, the flashlight battery with the main 18650 lithium battery.
2, lithium battery features: lithium battery and cell phone battery charging method is completely different; lithium battery is not memory, can always charge, do not overcharge and over discharge.
3, the first charge of 6 hours at least, according to the charger after the green light on it.
4, the natural discharge rate of lithium batteries in the unused, the daily release of its charge will be about 1% or less, although slow, but to prevent the placement of time too long.
5, pay attention to the battery waterproof, anti-period, drop and so on.
6, especially prompted to use anti-overcharge, anti-reverse, anti-short circuit of the 'three anti' charger;
7, do not use the battery for a long time, should be full of electricity to save, normally in about three months and then charge and discharge once;
8, the warranty note: the battery factory is no longer the scope of warranty.
4. Use of the torch
1, flashlight in use, according to the flashlight on the voltage and battery requirements to choose, do not indiscriminate use, to prevent burning bad circuit boards, different models, different voltage batteries do not use at the same time.
2, in use, when the flashlight brightness changes significantly to turn off the torch to prevent the battery over discharge.
3, cooling skills: flashlight in the use of the process, to ensure that the heat. Strongly require the battery is fully charged, it is best to use the second gear, so that the torch of the lamp and the battery to extend product life! Hand-held flashlight is the best Of the heat of the formula; recommended lit when the heat according to the flashlight in a timely manner heat or close, until the temperature down and then lit, in order to heat.
4, for the torch on the waterproof, shock and other instructions, to strengthen prevention.
5, the lamp cup wall to keep clean, absolutely can not be wiped by hand or hard objects; Chen Chen lens on the fingerprints, cotton swabs can be used to clean the lens cleaner.
6, can not direct the torch light eyes, super bright glare, so as not to affect the vision, especially children.
7, if you do not use the torch for a long time, please remove the battery (one month or longer), to avoid chemical corrosion.
5. Protection instructions
1, do not flashlight long-term with the sun, water, chemicals and corrosive gases such as contact, to avoid damage to the torch protection layer.
2, in order to maintain the '0' ring and thread rotation, according to 2-3 times a year in its surface wipe Vaseline oil and so on.
6. Troubleshooting
1, check the battery: to ensure that the battery has the power and the right direction to install the battery, can not use different brands of batteries, old and new batteries can not be mixed.
2, check the tail cover: to ensure that the switch has been tightened and good contact to ensure that the tail cover copper column and the tail cover ring metal sheet in good contact.
3, pay attention to whether the head is loose.

Flashlight to buy a few common errors
Misunderstanding 1: the brightness is not the higher the better

Flashlight to enhance the brightness of the method First, from the lamp to the reflective bowl, the battery, the main pull design and other comprehensive platform to enhance the international big and domestic brand-name products, have been rigorous design and testing to ensure the life and safety.
The second method is to use to increase the voltage and current to achieve: overclocking caused by the huge heat inside, because the two do not match, resulting in frequent burning lamp and lithium battery often over discharge, can only light a few minutes and often need maintenance The
Misunderstanding 2: misleading by false parameters
Many sellers intentionally or unintentionally
Misunderstanding 3: orange peel reflective bowl may not be better than smooth
Orange peel reflective bowl of the reflective efficiency than the light side of the lower, we can find the market with high power search lights are basically smooth bowl, because the reflective efficiency is high, far range. So why most tactical flashlight to use orange The reason is very simple, in order to get a perfect spot.Because we generally use the light bulbs are filament, and reflective bowl reflects the spot happens to be a filament projection, the principle is similar to the principle of convex lens into the phase So that the spot is a clear filament, and ugly. We look at the parameters depends on the actual effect!
The shop sells electricity really marked brightness, battery life is long, light color pure through white, condenser effect perfect! Is engineering, outdoor sports and other excellent auxiliary tools!
The advantages of the flashlight: small size, light weight, easy to carry, durable, with all-weather use of the function, strong light, direct distance, strong light can choose, strong light - far, low light - close, - flash flash. Top Titanium Dioxide Reinforced Strike A blow to a design that can be used in an emergency instead of a safety hammer to smash the windows to escape.
'common problem'
Q: Do you need to recharge and then use it?
A: Please first use, such as flashlight when the dark spots, and then recharging 4 hours and then use, lithium battery most afraid of discharge, please develop the usual habit of charging.
Q: How did the light bulb break?
A: lamp life 10W hours if unfortunately really bad, you can contact us, discount exchange.
Q: What is the lithium battery over discharge?
A: The brightness is also significantly weakened to continue to use, resulting in battery damage, even after a professional activation by the power will be significantly reduced, so usually pay attention to battery maintenance, a lot of charge.
Note the use of light flashlight
Do not always dismantle the lamp, so as not to cause the reflective cup or light bulb damage.
Light flashlight maintenance precautions
Please use the daily routine maintenance of the torch to keep you of high quality
1. Use a clean, soft cloth to wipe the torch after each use.
2. When the torch is in contact with seawater or corrosive liquid, please wash with water and dry with a hair dryer.
3. When the lamp cap and tail cover is not smooth, please apply a small amount of grease at the interface.
4. When the torch is not in use, keep the battery and remove it in a cool place.