HDMI USB3.0 video capture software dog With a simple installation, easy to carry, superior performance, good compatibility and so on, It can capture an HDMI 1080 p60 input and output signals; compatible with Windows, Linux, MacOS X and USB 3.0 interface, compatible Xu Multi-USB 3.0 chipset (Intel, Renesas, ASMedia mural logic), compatible with PCIe Gen1.1 x1 expansion exhibition USB 3.0 interface, HDMI video capture to meet shortwave UV and UAC standards, no need to install drivers and get on Set, Easy to use, is the real plug and play type.

Design of ultra low latency video stream via USB3.0

Capture card using the industry's leading USB3.0 standard, using uncompressed raw data capture game,

And close to zero delay speed output. No picture tear and artifacts, only super-process video stream

Product Size 98 * 55 * 16MM

Product Features

No need to install the driver, plug and play.

Compatible with Windows, Linux, OS X operating system

USB3.0, 300 - 350 mb / s throughput and compatible with USB 2.0

Audio and video transmission is through the software dog, will not take up CPU memory.

Can capture a single channel HD HDMI video signal.

You can automatically detect the input video format and adjust the output video size and frame rate.

Input and output signals up to 1080p / 60 Hz.

Compatible with UVC video capture and YUV422 video output.

Technical Parameters

Connection and use

1.by HDMI cable connected to the HDMI interface with the source, such as Such as Blu-ray player , Play station , Audio / video receiver, satellite receiver.

2.by USB3.0 line connected to the computer.

3.HDMI USB3.0 Video Capture Software Dog is based on UVC (Video class), UAC (audio class) standard. No need to install the driver and set, the operating system installation is complete, the relevant audio and video equipment will be added in the window will see the new device icon.

USB3.0 video capture

USB3.0 audio capture

USB3.0 output port : Connected to a computer or notebook USB3.0 port.

Power Indicator : The device is connected to the computer USB port, the light is on.

Signal indicator : When the device normally receives the video signal, it lights up.

Introduction to the software

Example: Potplayer (windows 7))

1. Install the Potplayer software on your computer.

2. Double-click the Potplayer icon to open the software.

3. Click 'Potplayer Open Device settings ...' or use the shortcut key 'Alt + D' to open the device settings window.

• Select 'Analog TV';
• Under the video device box, select 'USB3.0 Video Capture';
• In the input box, select HDMI;
• In the resolution box select the appropriate device resolution;
• In the audio box, select 'USB3.0 Audio Capture'
• Click 'Open device' to open the capture interface;
• 4: Click 'Potplayer Video Video recoder' or press the shortcut key 'Alt + C' to open the audio window;

• Choose to save location;
• Set the audio and video capture;
• Open audio and video capture;

Product List

Capture card host * 1

Manual * 1

USB3.0 line * 1

widely used