It is suitable for circuit control system with AC 50Hz or 60Hz, voltage up to 660V and DC working voltage up to 220V. It is used as control of electromagnetic starter, contactor, relay and other electrical circuit. Indicator button is also suitable for light signal This product complies with the GB 14048.5 standard.

Often working conditions:
1, the ambient air temperature is -5 ℃ ~ +40 ℃, 24 ℃ hours its average does not exceed +35 ℃.
2, the altitude: the installation site of the altitude of not more than 2000m.
3, the atmospheric conditions: the maximum temperature of +40 ℃, the relative humidity of the air does not exceed 50%, at the bottom of the temperature can allow a higher relative humidity, such as +20 ℃ up to 90% .For temperature changes Occasional condensation should take special measures.
4, pollution level: 3 level
5, the installation category: Ⅱ class

(Y090) LAY37-11BN Flat head button switch

(Y090)LAY37-11M Mushroom head button switch

(Y090)LAY37-11ZS emergency stop button switch

(Y090)LAY37-11X / 2Two position short handle 1 open 1 closed

(Y090)LAY37-20X / 3Three position short handle 2 normally open

(Y090)LAY37-20X / 2Two position short handle 2 normally open

(Y090)LAY37-11XB / 2 II Position long handle 1 open 1 closed

(Y090)LAY37-20XB / 3Three-position long handle 2 normally open

(Y090)LAY37-20XB / 2 II Position long handle 2 normally open

(Y090)LAY37-11D with light button switch

(Y090)LAY37-11Y / 2 II Position with key 1 on 1 off

(Y090)LAY37-20Y / 3 III Position with key 2 side open midway