Key Specification

Technology parameters
Pressure:
Maximum material pressure: 0.6MPa (6bar)
Maximum materialization air pressure: 1.2MPa (12Bar)
Minimum atomizing air pressure: 0.5MPa (5Bar)
Materials pipe connection: Material hose 6 * 4
Materialized air hose: plastic hose NW8 / 9 and G1/4AGA
Weight: about 800g
Noise : 73-96 dB (about 1 meter of the gun of the distance measurement)
Maximum operating temperature: 43 ° C
Optional materials nozzle: caliber were 0.50.81.01.21.51.82.0

Five of the update

1, nozzle integrated into one of formula
2, a liquid inlet design more reasonable
3, the new design of the gun linked
4, increase the control valve
5, a gas inlet design simpler
maintenance
When do maintenance you must:
Cleaning the gun to stop the supply of compressed air to stop the supply of materials, not residual air pressure in the gun.
Vulnerable parts such as seals, nozzle and needle gun must be checked regularly. The degree of wear is because the spraying of materials differ. From the leak, the leak and spray shape change can determine the parts for wear. Nozzle and needle guns must be replaced at the same time. You can not use a hard and sharp tools to clean the nozzle and gas cap.
Parts of the slide should be regular oiling, the recommended special lubricants CnSeiko to you.

Color: white/ blue