LED Bluetooth Audio lamp SGL-BA001

bargain

Keyword: led bluetooth audio lamp; energy-saving light; led bluetooth audio light; led music light; led audio light; light source replacement

LED Bluetooth Audio lamp

LED Lighting With Bluetooth Audio

This LED lighting with Bluetooth audio combines LED energy-saving lighting and sound technology together. The outer ring is the ring luminescence band, which can brighten the light of warm white or cool white. A small-caliber and high-powered full-range speaker is located in the middle area, and music player rise well. Bluetooth audio receiver is suitable for all kinds of products with Bluetooth, such as mobile phone, MID, notebook etc.

Item No.: SGL-BA001	Data		Condition
Lamp Base:	E27 / E26
Output voltage (AC)	90~245V		50/60Hz
Input power (Po)	≤15W		220V/ 50Hz
Power factor (PFC)	≥0.9
Power efficiency (η)	≥82%		220V/ 50Hz; Work at full capacity
LED lighting indicators
Source power (Pw)	≤4.5W
Luminous flux (Lm)	≥500
Color rendering index (CRI)	≥0.7
Color temperature (K)	5500-6000
Light decay (If)	≤3%			3000H; Ta=25°
Illumination angle (°)	≥160
Dimming	32-step digital
Audio amplifier indicators
Audio output power (PL)	3W			F0=1KHz; PL=1W
Frequency response (F)	20-20KHz			PL=1W; Unevenness+/ -3dB;
Signal to Noise Ratio (SNR)	≥80dB			PL=3W; A-weighted
Audio distortion (HTD+N)	≤0.5%			PL=1W; F=1KHz
Volume control	32-step digital
Bluetooth transmission distance	≥10M	No obstacle
Infrared control distance	≥10M	No obstacle
Use of environmental indicators
Application Environment (°)	-20~60
Storing Environment (°)	-40~70

Instructions of use

1. This product is suitable for the areas of grid voltage 90-240V AC.

2. The host interface of the product uses internationally accepted E27/ E26 standard.

3. The installed distance from the ground is more than 2.2M, and the maximum less than 4M.

4. The distance of Bluetooth transmission is greater than 10M (when no obstacles) .

5. Infrared remote control distance is greater than 10M, 360° remote control without dead space

(host installation testing height 3M) .

6. The host is in low power state when the host is remote shutdown, in line with environmental protection requirements. When unused for long periods, please turn off the line switch.

7. This product has perfect protection function. When the ambient temperature is too high or the power grid surge is too sharp, the host will enter protection automatically, and the machine is in standby. This is normal.

and it just needs simply press the button to restart.

More information about this new lamp, please contact our sales for the complete Instructions with many thanks!

( Remark: All pictures just for your reference only. )