ZRN-WZP-P series SMD temperature sensor pt100 Mainly used to measure the temperature of the surface, which is fixed by screws or other ways sensors attached to the surface, to achieve the ideal temperature effect. Chip temperature sensor and measured object contact area, close contact, so in some surface temperature measurements have obvious advantages: high temperature measurement accuracy, fast response, small size and easy fixed installation.

(A1) I

(A2) II

This is a diagram to real product

selected type table
ZRN-WZP-P									Platinum thermal resistance model
	A•	1= Ⅰ 2= Ⅱ a type size (non-magnetic) b Type Size (0 = non-magnetic, 1 = magnetic) c Type Size (0 = non-magnetic, 1 = magnetic) Designation							Sensor structure
		B•	1 = Pt100 5 = Pt500 10 = Pt1000						Sensor Type
			T•	1=-50~80 2=0~100 3=-50~200 4=-50~250 Designation					Temperature range (℃)
				P•	B = B grade A = A grade specified				Sensor accuracy
					Y•	1 = 10002 = 2000 designated			Lead length (mm)
						E•	2 = two 3 = three-wire line 4 = four-wire		Lead wire
						F•	1 = polyvinyl chloride PVC (-20 ~ 80 ℃) 2 = polyurethane TPU (-50 ~ 100 ℃) 3= Teflon (-50 ~ 250 ℃) Designation		Lead Material Lead in parentheses common temperature range
						H•	0 = no, do not fill 1 = both		Conductor shield / Cable sheath
							Z•	0 = no, do not fill Designation	special request
Remark : For user-specified parameters required, directly to the numerals or letters marked out Selection example : ZRN-WZP-P -A 2 b1- B1 T3 PA- Y1- E3 / F3 / H1 Explanation : PT100, temperature range -50 ~ 200 ℃, accuracy class A, wire length 1m, three-wire system. Dimensions of 30 (L) * 25 (W) * 10 (H), a magnetic

Chip Temperature Sensor Mainly used to measure the surface temperature, the SMD temperature sensor by a screw or a magnet attached to the surface of the sensor, the ideal temperature to achieve results. This patch by temperature sensor with different types of thermal resistance, thermocouple measuring various range of temperatures.
Technical Parameters
Platinum RTD: Pt100, Pt500, Pt1000 temperature range: (-200 ~ 400) ℃
Accuracy class: A class ± (0.15 + 0.002 | t |) ℃ Grade B ± (0.30 + 0.005 | t |) ℃ Note: | t | is the absolute value of the measured temperature.
Thermocouple: K-type coupling (0-900 ℃), etc.
Accuracy class: II Level
Chip Temperature Sensor Temperature mode: contact temperature measurement
SMD temperature sensor default specifications (for RTD or 0-600 ℃ thermocouple signal within 250 ℃)
Length (L) = 40mm width (W) = 20mm thickness (D) = 10mm diameter = 8 mm fixing hole probe diameter D = 6 mm probe length: For thermocouple signal exceeds 100 ℃, the probe must be long enough to do so that the temperature dropped to within 100 ℃
Note:
1, for the measurement of thermal resistance higher than 250 ℃ signal (Pt100, Pt1000, etc.), the patch probe diameter D = 8mm thickness = 12mm

2, the measurement signal is higher than 600 ℃ thermocouple (K, E, etc.), the patch probe diameter D = 8mm thickness = 12mm

3. For special temperature requirements, you can customize the patch sensor dimensions and diameter of the fixing holes and sensor parameters