ZRN-WR100 Spring-type thermocouple by spring surface thermocouple ends close to the measured object, in order to improve the measurement reliability and accuracy. Spring-type thermocouple and display instruments, such as supporting the use of direct measurement of 0 ~ temperature in the range of 400 ℃. spring-type thermocouple extension wire with a soft, you can freely bend, with thermal response time is small, easy to use, suitable for plastic extrusion machines, textile, food and other industries.

• structure principle

ZRN-WR100 Action principle type compression spring-type thermocouple, indexing characteristics and tolerances, reference junction (cold junction) temperature compensation, as well as

Display of measuring instruments and the general thermocouple connection methods are the same.

WRET-01-type compression spring-type thermocouple structure as shown by the protection tube mounting bolts. Locking sleeve, spring and thermocouple wires and other components.

• installation method

ZRN-WR100 Spring-type thermocouple installation method is shown, as shown in the measured object above a fixed installation, first tighten the bolts in the test

On the object, then the thermocouple close to the measured object, tighten the sleeve screws, and finally tighten the locking sleeve.

• Model Specifications

NOTE: Order shall specify: 1) Product name and model 2) Insert length (protective tube length + length + spring thread length) 3) sub-degree numbers hit '*' indicates special specification order