TU704 sub-size ultrasonic liquid (material) level meter

The main parameters and functions:
Power source: standard configuration 220VAC or 24VDC
Signal output: 4 ~ 20mA or optional RS485
Wiring: transducers and instrumentation 4-wire connection (wire size as long as it satisfies the mechanical strength can be recommended 4-core shielded cable, shield connected to GND single-head meter, the maximum transmission distance ≤300m)
Range: 0 ~ 30m
Display: 6 LCD, menu selectable backlight lit and off (off delay)
Full launch angle: 6 ° ~ 12 ° (proportional to the size and ranging capability emission angle)
Operating mode: measuring distance or measuring level
Level set: mounting height 'or' current level '
Current track: Abnormal namely with 'mode or' abnormal wait 'mode
Blind: 0.25 ~ 0.90m, blind size and distance capacity is proportional to the inherent blind
Resolution: measuring distance (10m:. 1mm ≥10m when measuring distance: 10mm
Probe protection: IP67, IP68
Accuracy: 0.25%, 0.5%
Ambient temperature: -20 ~ + 55 ℃
Probe Shape: Dimensions: 205 (H) * 115 (W) excluding water into the thread * 120 (D)
Probe mounting: nut mounting hole, thread: M66 * 3
Openings: 68mm
Probe Housing: high-strength engineering nylon (PA6 GF30)
Control output: 1. Wall-mounted 3 Group 6 relay outputs programmable control
2. The ultrasonic level meter panel mounted two sets of four programmable relay control output
Wall-mounted DIMENSIONS:
Instrument Size: 184 (H) excluding water into the thread * 231 (W) * 118 (D)
Meter Installation: wall mounting
Case Material: ABS plastic
Panel mounted shape and installation dimensions:
Instrument Size: 160 (W) * 80 (H) * 100 (D) mm
Hole size: 152 * 76mm
Instrument Materials: ABS plastic
A, split wall machine meter size Fig.

B, split disk installed meter size Figure C, one 2-wire, 3-wire meter size Fig.

Installation diagram