JF-ZY1500D semi-automatic multifunctional shock compression tiles molding machine

(A) Specific configuration:

(Ii) the main technical parameters:

(C) applies brick and yield:

(Iv) Features:

1. The model prototype reference JF-ZY1500C type, is in the JF-ZY1500C type devices into the market for two years, based on customer feedback, as well as many years of experience summed up by JF-ZY1500C type of defects to improve such equipment more stable performance, the failure rate is greatly reduced.

2. Using Jian Feng latest development and production of new vibrators, combined with the latest development of Jian Feng (Vibration and hydraulic principles), so that the models in the vibration increases at the same time, the vibration frequency is 5000 times / min, greatly increased, molding cycle time, improve production efficiency and greatly increases the molding cycle time, improve production efficiency, while reducing the damage to the equipment noise and vibration caused by the device itself.

3. The combined company independently developed Jian Feng (Vibration and hydraulic principles) designed hydraulic system makes part of the cylinder running smoothly, stability, speed, improve molding cycle time.

4. skip tracks and walking system increases driving stability device, so skip walking stability, reduce equipment leakage of material, thus reducing the man-hours spent cleaning up and unnecessary waste material

5. Patent lengthened guide sleeve, the sleeve made of nickel-chromium alloy, flat hardness, finish high pillar that the mold from stable, reduce the landing uneven mold caused by mold shortened equipment life, reduce product errors.

6. Scotch cloth fabric machine using reciprocating manner, cutting fast and uniform, improve molding efficiency, and ensure product density uniformity and stability, the unique design of the joint, so that the tooth cloth, replace the shaft easier, reduce the time needed for maintenance .

(V) Equipment:

JF-ZY1500D type equipment through years of careful research, continuous improvement crafted, the model of the device in terms of quality and stability can be said Zhen to perfect. Has large quantities exported to many countries in Africa, Southeast Asia and other places, in the domestic market is being widely used by the majority of users praise and trust.

The main features of this model are: simple operation, replacement of mold can produce different models of standard size bricks, hollow blocks, pavers and curbs, etc., truly a machine to ensure the stability of the equipment under the premise, Through continuous improvement, equipment vibration force and vibration frequency increases, with a unique hydraulic and auxiliary systems, the use of the equipment out of the product compactness and strength greatly improved, to make up for the presence of unburned pressure on the market is not enough, The disadvantage of the people questioned the existence of unburned quality.

Through continuous improvements make devices from stirring to a brick truly pipelined operation, significant savings in labor, due to the high production of dense articles, so the use of standard bricks produced by the device can then stacking, saving manpower, and solve problems early construction must first invest large sums of money to buy a large number of pallets, because our equipment standard bricks only need about 20 pallets. Due to the low equipment cost, simple operation, easy maintenance, so that some of the funds is not abundant, there is no sense of small-scale factories to achieve a self-employed construction dream is smaller than the funds invested to bring greater economic benefits.

www.concretebrickmachine.com

QQ: 1871671868

Tel: 15122361939; 18722616387

Contact: Mr. Wang

Tianjin Jian Feng Hydraulic Machinery Co., Ltd.

Address: Jixian County of Tianjin Development Zone