25 to 200MHz Digital Storage Oscilloscope with FFT Analysis, USB Interface

bargain

add to cart

Features:
- 2 vertical channels and high resolution color or B/W LCDdisplay (320 x 240 pixels)
- Main/delay dual time-base sweep, time zoom
- Auto measurement of 20 parameters and dual cursor V, T, 1/Ton-screen readout
- 10 groups of waveform and setting storage
- Edge, video and pulse triggers
- Waveform maths and FFT analysis
- Waveform record and recall
- Digital low, high, band-pass and band-stop filters
- Supports USB storage
- Elegant design, compact size and easy to carry
Technical Specifications:
- Bandwidth: 25, 40, 60, 100, 150 and 200MHz
- Real sampling rate: 250MSa/s (JC-1000 series), or 1GSa/s(JC-1000A series)
- Maximum equivalent sampling rate: 50GSa/s
- Channel: CH1, CH2 and independent ADC
- Memory depth: up to 4kB per channel
- Vertical sensitivity: 2m to 5V/div
- Vertical resolution: 8 bit
- Rise time: ≤14, 8.8, 5.8, 3.5, 2.3 and 1.8ns
- Input impedance: 1MΩ/13pF
- Input coupling: DC, AC and GND
- Time base: dual, 20, 5, 2, 1ns to 50s/div
- Trig mode: auto, normal and single time
- Trig type: edge, TV, pulse and delay
- Cursor measure mode: manual, trace and auto
- Cursor measurement: V, T and 1/T
- Auto measurement: Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg,Vrms, overshoot, Preshoot, frequency, risetime, falltime, period,±width, ±duty, delay A and B
- Waveform math: +, -, x, /, phase reverse and FFT
- FFT: 1024p (hanning, hamming, Blackman and rectangle)
- Storage: 10 waveforms and 10 setups
- X to Y mode: DC to full bandwidth and phase error≤3°
- Calibration signal: 1kHz square, 3.0Vpp