use : Suitable for textile air-conditioned room can also be used for other non-corrosive gas facility ventilation and ventilation place.
structure : This series fan mainly by the impeller, chassis, set the wind, a damper, diffusion tube consists of the motor impeller directly driven in part by the rotation of the impeller hub, blades, bushings, tile, cover, housing and so on... blade fixed to the cover by coupling two tiles, loose tiles as long as two screws, you can adjust the angle of the blades, impeller fixed taper sleeve is fixed, so the impeller installation and removal is very convenient.
Installation and maintenance: Users of the new purchase of fans, just the size of the embedded base foot bolt until the fan safety nut washer into the rear fastening to the requirements of basic formation, does not allow the existence of an axis tilt simultaneously according to Size fan inlet installation of water pipes, to be installed on the fan base plane connected to water, water supply systems require access to floating meter, so the amount of water can be adjusted. Installing C-type driven fan, it should be based in the Triangle piercing position open belt drive hole on the current collector. When servicing, you should first remove the water component, and then remove the disk axis at a waterproof cover and then remove the impeller.