Universal USB Power Adapter with Wall Mount AC/DC Switching Charger in 12W, Slim Type

bargain

Features:
- Universal input and wall mount, slim style
- 12W, single output, anywhere output voltage 8 to 11V DC
- Protection: OVP, OLP and short-circuit protection
- Meet CEC regulation and efficiency level V (except 3 to 5V)
- Class II power (without earth pin)/pass LPS
Specifications:
- Input voltage: 90 to 264V AC
- Input frequency: 47 to 63Hz
- Input current: 0.4A maximum
- Inrush current: 80A maximum (cold start)
- Efficiency: ≥67% at full load
- No load stand by power: <0.3W at 230V AC
- Hold up time: 10ms minimum at nominal line
- Output voltage (any where output voltage): 8 to 11V DC
- Ripple and noise: 2%p-p (maximum)
- Load regulation: 5% (maximum)
- Dielectric withstand: I/P-O/P: 3,000V AC
- Leakage current: 0.25mA (maximum)
- Operating temperature: -20 to 50°C (derating linearly from 100% load at 40°C to 75% load at 50°C)
- Storage temperature: -40 to 85°C
- Protections: OVP, OLP and short-circuit protection
- Safety standard: IEC/UL/EN60950-1, CB
EMC standard: (EN55022, CISPR22, FCC part 15) class B, EN61000-3-2, 3, EN61000-4-2, 3, 4, 5, 6, 8 and 11
Standard output connector: DC barrel jack
Standard output cable/length: UL2468/5ft
Model number: FRA012-S09-Sx
Output voltage: 8 to 11V
Output current: 1.5 to 1.09A
Maximum power: 12W
CEC level: V
CEC compliance model provide under customer's request
CEC compliance model standby power (at no load) < 0.3W
x = AC inlet type code
x = U for US plug
x = E for EU plug