72 men's watches LED light strip

72 men's watches LED light strip

14.53 USD

add to cart

New Men's Stainless Steel Wrist watch 72-LED Blue Light

  • Fashionable Stainless Steel Wrist Watch
  • Features 72 bright Blue LEDs on the watch
  • Displays time and date
  • Press any button, LED time displays
  • Automatically turns on momentarily every 15 minutes itself by setting
  • LED brightness level can be adjusted by settings
  • 2 buttons at the right side of the case for adjusting time and date and brightness level
  • High polished Stainless steel wrist band
  • Powered by 2 x CR2032 batteries (loaded)
  • NOTE: Water Resistant: splash-proof only, please take off before showering and any water activities
  • Movement: Quartz
  • Clasp: Fold-Over-Clasp
  • Gender: men / unisex
  • Watch Color: Silver
  • LED Color: Blue
  • Case Material: Stainless Steel
  • Band Material: Stainless Steel
  • Case Size (Length x Width x Thickness) : 55 x 31 x 10 mm / 2.16 x 1.22 x 0.39 inch
  • Band Size (Length x Width) : 220 x 20 mm / 8.66 x 0.71 inch

How to read TIME:

Look at this picture, the left one column represents HOUR (1-12) ; the right 5 columns represent MINUTE (5-60) , so the time in the picture is 8: 48.

-Press A button once, it will display time

How to read DATE:

As the picture in the right side, the left one column represents MONTH (1-12) ; the right 5 columns represent DATE.

-Press A button twice, it will display date. It will display a letter D in the up right, see the picture.

Detailed time setting instructions:

How to set time and date?

Look at the picture above:

Press button A or button B, it will display the time. And then, press button B, and then the HOUR will flash, then press button A to adjust the HOUR (with AM/ PM indicator) .

After set the HOUR; press button B again; and then the MINUTE will flash; then press button A to set the minute

After set the MINUTE; press button B again; and then the MONTH will flash; then press button A to set the MONTH (1-12)

After set the MONTH; press button B again; and then the DATE will flash; then press button A to set the DATE

After set the DATE; press button B again; and then the L (brightness level) will flash, then press button A to select the brightness level (1-7 level)

After set the brightness level; a OK/ NO will flash; press button B to choose OK or NO'; choose OK'; it means the LED will automatically displays momentarily every 15 minutes itself by setting; choose NO', then it won't.

Time display

Press button A or button B to display time

Unisex Stainless Steel Watch with 72-LED Blue Light Matrix Wristwatch Band