4*Fast Ethernet+16 Voice POTS (FXO\FXS) over E1\G.703 multiplexer

bargain

1 Function
4*Fast Ethernet+16 Voice POTS (FXO/ FXS) over E1/ G. 703 multiplexer provides conversion between ITU-T G. 703 standard E1 framed interface and 4 fast ethernet+1~16 voice POTS FXO/ FXS interface, can through E1 channel provide 1-16 voice, realize the long-distance extend of telephone line through E1 channel. It also provides one RS232 data channel.

The16 voice POTS FXO/ FXS over E1 multiplexer can automatically connected to the LAN with its uninterrupted learning the MAC address and the address as another purpose of the frame relay LAN. The 16voice and ethernet to E1 interface converters widely used for LAN and Wan networking, control, and so on, and particularly applicable to the network users to the network users with a single E1 channel access data and voice at the same time.

2 Features

realizes long-distance monitoring of local device to the remote device ;
provides 1~4 channels Ethernet ports; 10M/ 100M; full half duplex self adapt; support VLAN£»
The Ethernet interface supports AUTO-MDIX ( cross over and straight through self adapt) £»
4Ethernet interfaces support channel separate function, can set VLAN based on TAG
provides two clock types: E1 master clock, E1 line clock;
provides 3 kinds of loop-return function; namely E1 self-looping at local end; Ethernet self-looping at local end; ordered to self-loop at remote end;
realize the automatically rate set of local device to remote device£»
has the function of pseudo-random code testing; convenient for opening of the circuit; and can be used as an error code instrument;
Ethernet supports rate of N*64k (N=1-32) , which can be regulated from 64K to 1098K;
supports 75ohm unbalanced and 120 ohm balanced impedance at the same time;
Provide Ethernet auto reset function, run more stably£»
various Ethernet data indicate functions, which indicate data transmission status timely;
Provides 1-16 voice channels, support calling indication;
Voice connector FXO (FXS) , FXO connect to PBX and FXS connect to phone;
support 4 wire E&M
RS232 channel can transfer asynchronous serial data with self-adaptable baud rate of 300 to 115.200;

3 interface
E1 interface
Interface standard: Conforms to G. 703 standard
Interface rate: 2048k

Code: HDB3
Interface impedance: 75ohm (unbalanced) , 120ohm (balanced)
Connecter: BNC (75 ohm) , RJ45 (120 ohm)
Vibration characteristic: Satisfies G. 742 and G. 823 standard
Clock type: internal-clock, line clock

10/100Base-T ethernet port
Rate: 10M/ 100M£¬full/ half duplex self adapt
Protocol: support IEEE 802.3£¬IEEE 802.1Q (VLAN)
MAC address table: 4096 MAC addresses
Ethernet Total Memory Sizes: 64MBits SDRAM
Physical interface: RJ45, support AUTO-MDIX (cross over and straight through self adapt)

Voice port
FXS phone port
Ring voltage: 75V
Ring frequency: 25HZ
Two line input impedance: 600ohm¸ (hanging off)
Wastage: 40 db
FXO switch port
Ring test voltage: 35V
Ring test frequency: 17HZ-60HZ
Two line input impedance: 600ohm (hanging-off)
Wastage: 40 db

RS232 port

Rate: 300£115.2Kbps auto-adaptable (Asynchronous)

Interface characteristic: satisfies ITU-T V. 24 standard

Connector: RJ45

4 dimension
standalone: 483 (L) x140 (W) X50 (H) mm

5 Working Condition
Input voltage: AC180V ~ 240V ; DC-48V; DC+24V
Power consumption: 5W
Operating temperature: 0~ 50degree

Storing temperature: -40 ~ +70degree
Relative humidity: 95 %