1, 000mA DC to DC LED Driver with 7 to 30V DC Wide Input Voltage Range, Measures 23.4 x 14.0 x 10.16m

bargain

add to cart

LED driver DC to DC series, constant current, 24W, 1,000mA
24 watts, 1,000mA single output, high efficiency step down LED driver
Dimensions: 23.4 x 14.0 x 10.16mm
Features:
- For high brightness light-emitting diode products
- RoHS compliant 16-pin DIL package
- Wide input voltage range: 7 to 30V DC
- Output voltage range: 2 to 28V DC
- Output current range: up to 1,000mA constant current (±7%)
- Ripple and noise, (20MHz bandwidth): 300mVp-p maximum
- High efficiency (up to 95%)
- PWM/digital dimming and analog voltage dimming
- Operating frequency: 50 to 300kHz
- Operation temperature range from -40 to 71℃
- Storage temperature: -40 to 125℃
- Maximum case temperature: +100℃
- Case material: non-conductive black plastic (UL94-V0 rated)
- Protections: short-circuit protection
- Safety approval: IEC/EN 60950-1, EMS:IEC 61000-4 -2 , 3, 4, 6, and 8, EMI: EN55015 (CISPR22)
- Weight: 6.2g
PWM dimming and on/off control (leave Open if not used):
- Remote on/off:
  - DC/DC on: open or 0.3V
  - DC/DC off: Vadj <0.15V
  - Remote pin drive current (Vadj = 1.25V): <1mA
Quiescent input current shutdown mode (Vin = 30V): 25uA maximum
PWM dimming:
- Recommended maximum operation frequency: 1kHz
- Minimum switch on time: 200ns
- Minimum switch off time: 200ns
Analog dimming control (leave open if not used):
- Vadj input voltage range: 0.3 to 1.25V
- Adjust output current: 25 to 100%
Control voltage range limits:
- On: 0.2 to 0.3V
- Off: 0.15 to 0.25V
Analog pin drive current (Vadj = 1.25V): <1mA