
bargain
add to cart| Input voltage: 0 (v) | Waveform distortion: 0 (%) | Frequency voltage: 0 (%) |
| Output voltage: 0 (v) | Load voltage: 0 (%) | Circuit mode: SPWM switch |
| Load type: mixed load | Customized processing: Yes | Efficiency: 0 (%) |
| Range of application: home appliance manufacturing | Type: single phase inverter power | Model: 2KVA |
| Output frequency: 0 (Hz) | Brand: ACSOON | Product certification: CE |
| Control mode: pulse-width modulation | Input frequency: 0 (Hz) |
(Product brief)
This product is a power supply voltage power supply frequency is not stable, the voltage distortion, flicker, comprehensive quality problems such as drop cases, to protect sensitive equipment power quality of power electronic devices in the network.
Power supply uses advanced pulse width modulation (SPWM) IGBT high frequency inverter technology, the internal structure of AC-DC-AC to remove interference, output wave pure, regulators, frequency range, high accuracy, light weight, small size, output isolation transformer characteristics such as generator high high quality uninterrupted power supply system.
(Main features)
1, output isolation transformer, safe and reliable, any unbalanced loads and can be used independently for each phase.
2; Efficiency is above 90%; Applicable to a wide load; For sensual; Capacitive; Resistance and mixed load
3, fast dynamic response, load 0-100% changes, the steady-state response time ≤ 20ms.
4, strong ability to adapt to the natural environment, good resistance to interference.
5; Valley Mitsubishi IGBT; Hitachi chip output isolation transformer; Stable and reliable
6; Input passive filter; Improve power quality
7, redundant hardware output protection circuit with output voltage, overcurrent, overload, overheat, short-circuit protection and alarm, fast response, ensure that the power supply output fail not to damage electrical equipment.
8, dual-loop control, strong impact resistance and excellent load capacity.
9, separate actual real-time measurement of electric parameters appear: output frequency; Output voltage; Output current; Output power and power factor
(Standard)
(GB7260-87 uninterruptible power supply equipment) (Q/01AK001-2005 program-controlled frequency power supply) (GJB181A-2003 powered aircraft characteristics) (GJB572-88 aircraft ground power supply characteristics and General requirements)
(Technical data)
Model | AF50-11002 | AF50-31002 | ||
Capacity | 2KVA | |||
Volume (depth * width * height) | 450*440*222 (mm) | |||
Grade | High-end industrial products | |||
Circuit mode | IGBT/SPWM pulse width modulation method | |||
AC input | Phase | Single phase | Three-phase | |
Voltage | 130-280V | 265-495V | ||
Frequency | 30-80HZ | |||
AC output (The standard sine wave) | Phase | Single phase | ||
Voltage | 220V±0.5% | |||
Current electricity | 9.1A | |||
Frequency | 50HZ±0.01% | |||
Frequency stability | ≤±0.01HZ | |||
Rates of voltage regulator | ≤±0.5% | |||
Load stability | ≤±1% | |||
Waveform distortion | THD ≤ ± 3% (resistance load) | |||
Power factor | 0.85 | |||
Efficiency | ≥85% | |||
Reaction time | (20ms | |||
Adaptive load | No type limit, but the amount of capacitive and inductive loads should be reduced for | |||
Panel display | Frequency, voltage, current, power and power factor. | |||
Protection device | Input without Fuse switch; Output Fuse switch; Over voltage; Current; Overload; Automatic Skip protection and over-temperature and short circuit alarm | |||
Noise | (60dB | |||
Insulating reactor | 500Vdc 20M ω or more | |||
Pressure resistance insulation | 1800Vac/5Ma/1 minutes | |||
Cooling device | Fan forced cooling | |||
Chassis structure | Paint film surface quality of the three-tier, thin orange line | |||
Electromagnetic compatibility | References GJB151A-97, and GJB152A-97 requirements | |||
Use environment | Working temperature | -10~50℃ | ||
Relative humidity | 0-90% (non-condensing) | |||
Altitude | 2000 meter | |||
Notes | Power supply according to the modular design, easy to repair and replace parts. In accordance with the standards on ship vibration test, strengthening anti-vibration, ensure the reliable performance after long-distance transport. Parameter adjustment has been completed, still keeps its original settings. RS232/485 communication monitoring optional communication interface. According to the customer request voltage, frequency and other parameters can be customized. | |||