Automotive LED Driver Module with Universal LED Driver/LED Power Supply, for Car
bargain
add to cart
- For high brightness light emitting diode products
- Universal AC input: 90 to 264V AC
- Fully isolated plastic case with IP65
- Built-in constant current limiting design
- Operating temperature: from -10 to 40°C full load
- Protections: OVP/OLP/SCP
- Class II power design without earth pin
- Warranty: 1 year
- Model number:GP-LC3512-08/GP-LC3536-08/GP-LC7012-08/GP-LC7021-08
- LED operating voltage: 3-12V DC/3-36V DC/3 to 12V DC/3 to 21VDC
- Rated current range: 350mA, ±6%/350mA, ±6%/700mA,±6%/700mA, ±6%
- Rated maximum power: 3W/8W/6W/9W
- Efficiency (typical) 230V AC: all at 75%
- Rise time: less than 250ms at full load
- Voltage range: 90 to 264V AC
- Frequency range: 47 to 63Hz
- AC current: 0.2A at 115V AC/0.1A at 230V AC
- Inrush current: no components will be stressed over its maxspecification according to I2T
- Leakage current: less than 0.25mA/240V AC
- Over load: 100 to 135% rated output power
- Recovers automatically after fault condition has beenremoved
- Short circuit type: Hiccup mode, recovers automatically afterfault condition is removed
- Over voltage: 105 to 120% rated output voltage
- Operation humidity: 20 to 95% RH non-condensing
- Storage temperature: -20 to 80°C
- Storage humidity: 10 to 95% RH
- Vibration: 10 to 500Hz, 2G, 10min/1 cycle, period for 60mineach along X, Y, Z axes
- Safety standards: meet EN61347-1, EN61347-2-13, IP65approved
- Withstand voltage: meet I/P-O/P: 3.75kV AC
- Isolation resistance: meet ﹥100M©/500V DC at25©
- EMI conduction and radiation: meet EN55015
- Harmonic current: compliance to EN61000-3-2 class C,EN61000-3-3
- EMS immunity: meets EN61547, EN61000-4-2, 3, 4, 5, 6, 8,11
- MTBF: 400K hours (minimum) MIL-HDBK-217F (25)
- Dimensions: 50 x 34 x 23mm
- Packing/carton: 36 x 24 x 23cm/100pcs/carton
- Weight: 105g
