• High-strength, high flexibility, excellent adhesion and cohesion, the adhesive / sealant flexible and durable.

• Single-component, moisture curing, thixotropic excellent facade coating is not flowing, easy construction.

• No solvents, sticky substrate without corrosion, no pollution, environmental pollution.

• Good sealing, puncture resistance, water resistance, oil resistance, resistance to aging.

Mainly used in automotive windshields and side windows of maintenance.

project	Performance	project	Performance	project	Performance
Exterior	Black, cream	Volatile	≤4%	Shear strength	≥2.5MPa
density	1.30 ± 0.05 g / cm3	hardness	55±5 Ao	Construction of the temperature	+5~+35℃
Dry time	20 ~ 60 min	Tensile Strength	≥6.0MPa	Shelf Life	9 months
Curing speed	3 ~ 5mm / d	Elongation at break	≥400 %

310ml aluminum cylinder, 20 / box; 300ml flexible sausage, 20 / box; 400ml flexible sausage, 20 / box; 600ml flexible sausage, 20 / box.

• Transport: Moisture, rain, sun, high temperature, away from heat, handle with care, prohibit squeeze collisions.

• Storage: Sealing and storage is in a cool, dry place, recommend storage at a temperature of 5 ~ 25 ℃, humidity ≤50% RH environment, prohibit stored at a temperature higher than 30 ℃ or the humidity is greater than 80% RH environment.

In the original packaging container, shelf life is not less than nine months, nine months later, passed the test can still be used.

See related construction process different depending on the application site.

• It is recommended for use with the primer; for less demanding situations, being sticky substrate can be used directly by the activator after treatment;

• Selection of the product and the end of plastic; activation agent ancillary products to treat sticky substrate adhesion test must first be carried out prior to bonding; to ensure that they have good compatibility; while in use before

It should ensure that the main glue, end of plastic, activators belong qualified products shelf life.

• construction in strict accordance with the construction process, any action in violation of the construction process may cause bonding failure;

• This product is fully cured non-toxic, but before curing should avoid contact with the eyes, skin, and if skin contact with the eyes, first with soap and water or alcohol scrub, then rinse with water.

If the situation is serious, they should immediately seek medical treatment.