Apparatus for determination of apparent density of FT-105A surfactant

Apparatus for determination of apparent density of FT-105A surfactant Scope of application: surfactant for free-flowing powdery or granular materials can also be used for massive surfactants, but these lumps should be easy to loose and granular material that is not broken.

Sub-standard: GB/T6373-2007 surface active agents-determination of apparent density.

Apparatus for determination of apparent density of FT-105A surfactant Technical parameters:

1, funnel: Aperture 40mm under the free-flowing powder funnel; When there is a mass of powder should be used under the funnel diameter: 60mm funnel.

2, receiver: cylinder capacity: 500mL

3, bracket for fixing the funnel; Floor cylinder pins

4 ended: 110*70mm; 5, the ruler: 150mm; 6, stainless steel tube

7, materials: stainless steel 8, size 250*250*320mm

Apparatus for determination of apparent density of FT-105B slurry

Apparatus for determination of apparent density of FT-105B slurry Sub-standard: GB/T6373-2007 determination of apparent density of the paste, paste surfactant or similar product filling method for determination of apparent density, product specific parameters according to the standard requirements.

Apparatus for determination of apparent density of FT-105B slurry

FT-105 apparent density Analyzer

FT-105 apparent density Analyzer This instrument is used to make plastic from funnel under apparent density determination of loose bulk materials, for polyvinyl chloride resins-determination of apparent density

FT-105 apparent density Analyzer Chemical industry and plastic profile factory quality inspection of raw materials into the plant ideal for test equipment. Product complies with GB/ T3402 , GB/ T1636 Other standards.
FT-105 apparent density analyzer technical parameters:

Main components: base, support frame, funnel, insert plate, feeder
Feeder capacity: 100m l± 0.5ml
Sample volume: 110ml-120ml
Hopper angle: 40 Hole diameter 8mm

Meet K-6721 (1966) required

This instrument is used for plastic flows from funnel under apparent density determination of loose bulk materials, chemical industry and plastic profile plant ideal testing equipment for quality inspection of raw materials into the plant. Products conform to GB/T3402 and GB/T1636 GB/T20022-2005 GB/T13173-2008 and 1636-79 standards requirements.
Apparent density Analyzer

This method is suitable for measuring bulk density of the powder molding, namely mass per unit of volume, for molded plastic packaging, mold cavity and provides parameters for the design of the extruder screw. GB/t 3402, GB 1636 standards.

Apparent density Analyzer

1 sample: standard extract samples by product.

2, test equipment:

(1) scale: 0.1 g

(2) surface view Tester

(3) the graduated cylinder type measuring cup: 100 ml

Note: specific data, please keep in touch with us, and related products.

Configuration: ruler; Brush base, support frame, funnel, insert plate, feeder, manual, certificate of warranty card.

Jorge Rico powder powder instruments can also provide testing solutions

FT-105C ASTMD1895 plastic apparent density Analyzer

FT-105C ASTM plastic apparent density apparent density ASTM D1895 test instrument

Standard: according to ASTM D1895 03Standard Test Methods forApparent Density, Bulk Factor, and Pourability of PlasticMaterials1; Apparatus for Apparent Density Test, Method a and b production.

FT-105C ASTMD1895 plastic apparent density analyzer technical parameters

Technical parameters requirements: first, a funnel requests: Apparatus for Apparent Density Test, Method a

Second, the funnel type b requirement 1, measure height of 24 ± 0.1cm; 2, the height of the funnel and measuring cup 3.8cm; 3, funnel export 2.54cm ± 0.16cm; 4, hopper opening 12.7 ± 1.0CM; 5, 400ml ± 2.0ml volume of the measuring cup; 6, angle: 24 degrees; 6, material: stainless steel; 7, configure attachments: stopwatch 1; Brush 1; Ruler 15cm1 instructions; Warranty card; The certificate of quality.

Jorge Rico instrument Tip: you might be interested in the following products:

Powder powder commonly used test equipment solutions

FT-100 tap density meter; Ji Song FT-101 Jacqueline Scott capacity density Tester
FT-102 Hall flow meter/bulk density Tester-stainless steel; FL4-1 Hall flow meter/powder flow Tester-brass; FT-103 density meter; FT-103A active white soil bulk density measuring device;

FT-103B rest angle measuring instrument of dust; FT-104 aluminium oxide-determination of bulk density meter;

FT-104A rest angle measuring instrument; FT-104B angle of repose Tester; FT-104C aluminum fluoride liquid meter; Apparent density analyzer FT-105; FT-105A apparatus for determination of apparent density of active agents; FT-105B pulp-determination of the apparent density devices; FT-105C ASTM apparent density of plastics; FT-106 abrasive bulk density Analyzer (formerly DMP-II)
FT-106A powder density meter; FT-106B super hard material bulk density Tester
FZS4-4 tap density meter; FT-102A vibration hopper apparent density Analyzer

FZ4-3-vibrating funnel-determination of bulk density apparatus; FS4-2 siketesong density meter

DMP-II ordinary abrasive bulk density meter; FT-107 fertilizer, bulk density (loose) Tester