Repeatability error: 1	Samples can be measured state: 1
Custom processing:	Measuring range: For measuring powder tap density consistent with USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) specifications.
Type: Density Tester	Specifications:
Scope: For measuring powder tap density consistent with USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) specifications.	Dimensions: 1 (mm)

Cheap FZS4-4 tap density tester (Original FZS4-4B)

Cheap FZS4-4 tap density tester Production requirements of the instrumentation system according to international standard ISO3953 requirements of production, GB T 5162-2006 (determination of metal powder tap density) / satisfied, and with reference to the United States Pharmacopoeia independent research and manufacture of the powder density test instruments for measuring vibration powder real density consistent with USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) Specification requirements, the powder through the tap, its density increases the percentage is a comprehensive reflection of the powder variety of performance. The instrument is by using a rotating eccentric slide up and down to make directional slider, percussion drill seat, the inner cylinder powder gradually tap means, mainly used for the determination of various shapes powder tap density, non-metallic powder can also be learn to use.

Cheap FZS4-4 tap density tester Technical Parameters

Vibration stroke tap apparatus 3 ± 0.1MM

Vibration frequency 250 ± 15 beats per minute

Glass cylinder volume is 100 ± 1.0ml, graduated some high 175 ± 10mm. Glass cylinder volume of 25 ± 0.5ml scale section of a high 135 ± 7mm. 100ml graduated cylinder volume between the smallest scale is 1ml, measurement accuracy of ± 0.5cm ; cylinder between 25cm minimum scale volume of 0.2cm, measurement accuracy of ± 0.1cm

Cheap FZS4-4 tap density tester Maintenance

1, Supply voltage should be between 200V ~ 240V, when the power supply voltage instability, or when there are glitches, should be equipped with precision purifying AC power supply.

2, This equipment should be placed smooth, firm and avoid vibration, percussion, to prevent slipping.

3, In the handling or movement, attention should be gently, and can not hit the instrument.

4, When cleaning the surface of the instrument can be used wet towel dipped in detergent wring wipe the liquid can not flow into or spill into the interior of the instrument.

5, Do not turn off power to the system instantly after opening each time opening and closing time interval should be greater than five seconds.

6, Always check protective earth cable, etc., to ensure that all parts of the system are in good ground state.

7, Vibration components belong to the moving parts of the linear bearing spilled into the powder, please clean with a brush regularly adding an appropriate amount to the linear bearing lubricants.

Cheap FZS4-4 tap density tester test object
Various metal powders: such as aluminum powder, zirconium powder, nickel powder, tungsten powder, tin powder, zinc powder, molybdenum powder, magnesium powder, copper powder and other precious metals, an alloy powder or metal oxide powder and the like.
Non-metallic powder: such as talc, kaolin, calcium carbonate, coal, phosphor, brucite, calcite, wollastonite, tourmaline, diamond, barite, fluorite, zeolite, boron carbide, clay, graphite, quartz, gypsum, bentonite, diatomaceous earth, zirconium silicate, alumina, mica, clay, and the like.
Other powders: such as soil, dyes, pharmaceuticals, pesticides, abrasives, paints, food additives, catalysts, cement, sand and other rivers

Cheap FZS4-4 tap density analyzer instruction video link:

http: //v.youku.com/ v_show / id_XMzc3NDUxOTU2 html.

http: //www.tudou.com/ programs / view / UR6wdJ0OKAM /

There Related Products: FT-100B practical tap densitometer; FZS4-4 Cheap tap density tester; FT-100A Microcomputer Powder Density Tester

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder test solutions

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester

FT-100A Microcomputer Powder Density Tester

FT-100A Powder Density Tester Is consistent with USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) Specification requirements and GB / T 5162-2006 / ISO3953: 1993 (metal powder tap density measurement), the instrument covers the national standard GB / T 5162-2006 / ISO3953: 1993 in the indicators ..

FT-100A Powder Density Tester By a variable speed motor, vibration components, micro and mini printers and other components. And the instrument with a compact, solid, simple operation, suitable for non-metallic powder, metal powder, pharmaceuticals, chemicals, batteries, abrasives as well as research and teaching and other fields, is the ideal instrument for powder industry tap density test. The basic working process of tap density tester is the powder cylinder fixed to the mechanical vibration device, vibration motor driven mechanical vibration device up and down vibration, graduated tube containing powder With the mechanical vibration device rhythmic vibration occurs, the vibration frequency increases, the cylinder where the powder gradually after the tap, vibration frequency reaches the set number of times, mechanical vibration device to stop the vibration, volume readout graduated tube, according to the density Definition: mass divided by volume, thereby obtaining powder tap density after.

FT-100A Powder Density Tester Technical Specifications:

1. Sample weight: ≤500.00 g;
2. Sample volume: ≤250.00 milliliter;
3. Single frequency vibration: 0 ~ 99999 Views (when set to 0 Times when the result is output as 'bulk density') ;
4. Allow the motor torque: 0.86 N.m;
5. Vibration frequency: 0 to 300 rev / min (adjustable);
6. Vibration amplitude: maximum 14mm, 1-14mm adjustable integer;
7. Repeatability error: ≤1%;
8. Accuracy error: ≤1%;
9. Input Power: AC 220V (50Hz / 60Hz), 40W.
10. Installation and use

Cylinder selection

FT-100A Microcomputer Powder Density Tester equipped 25ml , 50 ml , 100 ml , 250 ml Four different specifications of the cylinder (see annex). In order to improve the accuracy of testing, please be measured based on the weight of powder ( m ) And bulk density (ρ) Select the appropriate cylinder.

Cylinder volume ( cm3 )	Powder Weight (g)	Bulk density ( g / cm3 )
25	m ≤ 10.0	ρ≤ 0.8
	10.0≤ m ≤20.0	0.8 ≤ρ≤2.0
	20.0≤ m ≤50.0	2.0 ≤ρ≤7.0
	50.0≤ m ≤100.0	ρ≥7.0
50	10.0≤ m ≤20.0	ρ≤ 0.8
	20.0≤ m ≤50.0	0.8 ≤ρ≤2.0
	50.0≤ m ≤100.0	2.0 ≤ρ≤7.0
100	m ≤ 100.0	ρ≤1.0
	m ≥ 100.0	ρ≥1.0
250	m ≥ 100.0	ρ≤ 1.0

NOTE: To improve the measurement accuracy, choose a small cylinder volume.

FT-100A Microcomputer Powder Density Tester Test object
Various metal powders: such as aluminum powder, zirconium powder, nickel powder, tungsten powder, tin powder, zinc powder, molybdenum powder, magnesium powder, copper powder and other precious metals, an alloy powder or metal oxide powder and the like.
Non-metallic powder: such as talc, kaolin, calcium carbonate, coal, phosphor, brucite, calcite, wollastonite, tourmaline, diamond, barite, fluorite, zeolite, boron carbide, clay, graphite, quartz, gypsum, bentonite, diatomaceous earth, zirconium silicate, alumina, mica, clay, and the like.
Other powders: such as soil, dyes, pharmaceuticals, pesticides, abrasives, paints, food additives, catalysts, cement, sand and other rivers.

Note: Specific parameters, please keep in touch with us, as well as related products.

Test Procedure samples

1. Clean the cylinder; 2. the dried sample; 3. Weighing and enter the sample weight; 4. All samples loaded into the cylinder;

5. Complete vibration; 6 reads and input volume; 7. Press 'Calculate' button to complete the calculation; 8. Print Results

There Related Products: FT-100B practical tap densitometer; FZS4-4 Cheap tap density tester; FT-100A Microcomputer Powder Density Tester

FT-100B practical tap densitometer. Heap densitometer

FT-100B Practical tap density tester Is based on GB / T 5162-2006 / ISO3953: 1993 (metal powder tap density measurement), and with reference to the United States Pharmacopoeia independent research and manufacture of the powder density test instruments, the instrument covers the national standard GB / T 5162-2006 / ISO3953.: 1993 in various indicators meet the USP (United States Pharmacopoeia), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) specifications.

1.1 FT-100B Practical tap density tester By a variable speed motor, vibration components, and other components. And the instrument with a compact, solid, simple operation. The basic characteristics

u Accuracy: Automatic reservations 5 Significant digits after the decimal point may be accurate to 4 Bit.

1.2 Environmental requirements

u power supply: communicate with 200V ± 10% 50Hz , 35W .

u Relative humidity: Less than 85%, no condensation.

u Other requirements: Environmental clean no smoke, no mechanical vibration source or around sources of electromagnetic interference.

FT-100B Practical tap density tester Technical Specifications:

1. Sample weight: ≤500.00 g;
2. Sample volume: ≤250.00 milliliter;
3. Single frequency vibration: 0 ~ 99999 Views (when set to 0 Times when the result is output as 'bulk density') ;
4. Allow the motor torque: 0.86 N.m;
5. Vibration frequency: 0 to 300 rev / min (adjustable);
6. Vibration amplitude: maximum 14mm, 1-14mm adjustable integer;
7. Repeatability error: ≤1%;
8. Accuracy error: ≤1%;
9. Input Power: AC 220V (50Hz / 60Hz), 40W.

FT-100B Practical tap density tester test object
Various metal powders: such as aluminum powder, zirconium powder, nickel powder, tungsten powder, tin powder, zinc powder, molybdenum powder, magnesium powder, copper powder and other precious metals, an alloy powder or metal oxide powder and the like.
Non-metallic powder: such as talc, kaolin, calcium carbonate, coal, phosphor, brucite, calcite, wollastonite, tourmaline, diamond, barite, fluorite, zeolite, boron carbide, clay, graphite, quartz, gypsum, bentonite, diatomaceous earth, zirconium silicate, alumina, mica, clay, and the like.
Other powders: such as soil, dyes, pharmaceuticals, pesticides, abrasives, paints, food additives, catalysts, cement, sand and other rivers.

Note: Specific parameters, please keep in touch with us, as well as related products.

. There Related Products: FT-100B practical tap densitometer; FZS4-4 Cheap tap density tester; FT-100A Microcomputer Powder Density Tester