FT-105C ASTM plastic apparent densitometer ASTM D1895 Apparent Density Tester

FT-105 Apparent density analyzer

FT-105 Apparent density analyzer The instrument is mainly used to set aside provisions funnel Determination of apparent density of plastic bulk material for PVC resin apparent density FT-105 Apparent density analyzer is the chemical industry as well as plastic profile factory quality testing of raw materials into the plant ideal testing equipment. products meet GB / T3402 , GB / T1636 And other standards.
FT-105 Apparent density analyzer Technical Parameters:

The main components: base, cage, funnel, flapper, by the feeder
Feeder by volume: 100m l± 0.5ml
Sample volume: 110ml-120ml
Funnel angle: 40 Degree, a pore size of 8mm

To meet K-6721 (1966) of the requirements

The instrument is mainly used for determination of apparent density plastic outflow of bulk material from a predetermined funnel, is the chemical industry as well as plastic profile factory quality testing of raw materials into the plant ideal testing equipment. Products comply with GB / T3402, GB / T1636 GB / T20022 -2005 GB / T13173-2008 and 1636-79 standards.
Technical Parameters:
Main components: base, support frame, funnel, flapper, by the feeder
Feeder by volume: 100ml ± 0.5ml
Sample volume: 110 ~ 120ml

Apparent density analyzer

This method is suitable for measuring the apparent density of the powder molding compound, the mass per unit volume for molding plastic packaging, mold cavity and extrusion screw design provides parameters in line with GB / T 3402, GB 1636 standards.

Apparent density analyzer

1, Sample: extracting a sample standard product requirements.

2, the test instrument:

(1) balance: a sense of the amount of 0.1 g

(2) surface view tester

(3) The cylinder-type cup: 100 ml

Note: Specific parameters, please keep in touch with us, as well as related products.

Configuration: ruler; brush, base, cage, funnel, flapper, by the feeder, manual, certificate, warranty card and so on.

FT-105C ASTM plastic apparent densitometer

Standard: according to ASTM D1895 03Standard Test Methods forApparent Density, Bulk Factor, and Pourability of PlasticMaterials1; Apparatus for Apparent Density Test, Method A and B production.

Technical parameters: a, A-type funnel requirements: Apparatus for Apparent Density Test, Method A

Two, B-type funnel requirements 1 cup height 24 ± 0.1cm; 2, height 3.8cm funnel and measuring cup; 3, exit funnel 2.54cm ± 0.16cm; 4, the funnel opening 12.7 ± 1.0cm; 5, the volume of the measuring cup 400ml ± 2.0ml ; 6, angle: 24 degrees; 6, material: stainless steel; 7, Configuration attachments: Stopwatch 1; brush 1; ruler 15cm1 the manual; warranty card; certificate.

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass; FT-103 bulk density tester; FT-103A activated clay bulk density measuring device;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; FT-105 Apparent Density Tester; FT-105A active agents apparent density measuring device; FT-105B The slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester

FT-105C ASTM plastic apparent densitometer ASTM D1895 Apparent Density Tester

FT-105 Apparent density analyzer

FT-105 Apparent density analyzer The instrument is mainly used to set aside provisions funnel Determination of apparent density of plastic bulk material for PVC resin apparent density FT-105 Apparent density analyzer is the chemical industry as well as plastic profile factory quality testing of raw materials into the plant ideal testing equipment. products meet GB / T3402 , GB / T1636 And other standards.
FT-105 Apparent density analyzer Technical Parameters:

The main components: base, cage, funnel, flapper, by the feeder
Feeder by volume: 100m l± 0.5ml
Sample volume: 110ml-120ml
Funnel angle: 40 Degree, a pore size of 8mm

To meet K-6721 (1966) of the requirements

The instrument is mainly used for determination of apparent density plastic outflow of bulk material from a predetermined funnel, is the chemical industry as well as plastic profile factory quality testing of raw materials into the plant ideal testing equipment. Products comply with GB / T3402, GB / T1636 GB / T20022 -2005 GB / T13173-2008 and 1636-79 standards.
Technical Parameters:
Main components: base, support frame, funnel, flapper, by the feeder
Feeder by volume: 100ml ± 0.5ml
Sample volume: 110 ~ 120ml

Apparent density analyzer

This method is suitable for measuring the apparent density of the powder molding compound, the mass per unit volume for molding plastic packaging, mold cavity and extrusion screw design provides parameters in line with GB / T 3402, GB 1636 standards.

Apparent density analyzer

1, Sample: extracting a sample standard product requirements.

2, the test instrument:

(1) balance: a sense of the amount of 0.1 g

(2) surface view tester

(3) The cylinder-type cup: 100 ml

Note: Specific parameters, please keep in touch with us, as well as related products.

Configuration: ruler; brush, base, cage, funnel, flapper, by the feeder, manual, certificate, warranty card and so on.

FT-105C ASTM plastic apparent densitometer

Standard: according to ASTM D1895 03Standard Test Methods forApparent Density, Bulk Factor, and Pourability of PlasticMaterials1; Apparatus for Apparent Density Test, Method A and B production.

Technical parameters: a, A-type funnel requirements: Apparatus for Apparent Density Test, Method A

Two, B-type funnel requirements 1 cup height 24 ± 0.1cm; 2, height 3.8cm funnel and measuring cup; 3, exit funnel 2.54cm ± 0.16cm; 4, the funnel opening 12.7 ± 1.0cm; 5, the volume of the measuring cup 400ml ± 2.0ml ; 6, angle: 24 degrees; 6, material: stainless steel; 7, Configuration attachments: Stopwatch 1; brush 1; ruler 15cm1 the manual; warranty card; certificate.

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass; FT-103 bulk density tester; FT-103A activated clay bulk density measuring device;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; FT-105 Apparent Density Tester; FT-105A active agents apparent density measuring device; FT-105B The slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester