The company FL4-1 flowability and bulk density tester (Tun Huang, quality assurance, welcome to consult the discussion.

FT-102B Automatic powder flowability tester
I. Overview FT-102B automatic powder flowability tester is through advanced control technology, testing powder flow control system automatically time to reduce blockage caused by traditional manual way to test error and stopwatch timing error, so that test results closer The actual value of the product itself, to achieve more accurate test results on the powder trait analysis and product quality control, the ratio has a very good improvement, thereby reducing production costs.
Second, the product is widely used in the production, quality inspection by, research institutes and universities laboratories for materials analysis and measurement use.
Third, the instrument to meet the GB 1482-2010-T metal powder flowability measurement standard funnel (Hall flow meter) Instead of GB1479-84, GB1482-84 standard specification production with the design, production and its detection methods and results and international on a common detection method has versatility. This product is also suitable for measuring powder flowability and similar powder bulk density suitable for the determination of metal powder flowability using a standard funnel method. Where can freely flow through the aperture of 2.5mm standard funnel powder, can use this device.
Fourth, the technical parameters
1. funnel (export 2.5mm and 5.0mm each)
Funnel made of stainless steel or brass material, and has a sufficient thickness and hardness to prevent deformation and excessive wear.
2. bracket, bracket base and a graduated cylinder for receiving the fixed funnel. Base for mounting bracket and receiving cylinder, adjust the level, stable and vibration free. Stand height adjustment and fixed with the supplied wrench, funnel attached to the bracket. Reception cylinder (stainless steel plate) is placed on the base, to collect the powder.
3 balance (user-owned) the largest weighing 100g; precision 0.05g.
4. This device is equipped with a cup volume of 25ml stainless steel measuring cup. Users can complete the determination of metal powder bulk density (Funnel method) reference to the provisions of the national standard GB 1479-84.
5. The instrument consists of a control box electrical parts and test parts, automatically open the discharge port timing. After the sample outflow stop the clock.
6. This instrument can choose to configure the printer and software systems. Testing finished, automatically print out the test results
Ricoeur (Albert) Instrument Production tips, as well as associated products FT-102A vibration funnel bulk density tester, FT-100A tap density tester; FT-101 Scott capacity meter bulk density tester, FT -102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass

FT-102 Hall flow meter / Bulk Density Tester (stainless steel material)

FT-102 Hall flow meter flow and bulk density measuring device is the instrument instead of GB1479-84, GB1482-84 standard specification according to GB 1482-2010-T metal powder flowability measurement standard funnel (Hall flow meter) provisions of design and production. Its detection methods and results and generic detection methods internationally versatile. This product is also applicable to similar powder measuring powder flowability and bulk density.

The device is suitable for the determination of metal powder flowability using a standard funnel method. Where can freely flow through the aperture of 2.5mm standard funnel powder, can use this device. FT-102 Hall flow meter / Bulk Density Tester Technical Requirements

1 funnel (hole diameter 2.5mm and 5.0mm each one) funnel made of stainless steel, and has a sufficient thickness and hardness to prevent deformation and excessive wear.

2 bracket, bracket base and a graduated cylinder for receiving the fixed funnel. Base for mounting bracket and receiving cylinder, adjust the level, stable and vibration free. Stand height adjustment and fixed with the supplied wrench, funnel attached to the bracket receiving cylinder (stainless steel plate) is placed on the base, to collect the powder.

3 balance (user-owned) the largest weighing 100g; accuracy of 0.05g.

4 stopwatch measuring time can be accurate to 0.01s.

The device is equipped with a 5 cup volume of 25ml stainless steel measuring cup. Users can complete the determination of metal powder bulk density (Funnel method) reference to the provisions of the national standard GB 1479-84.

Test Buju

A 50g aliquot of sample weighed to the nearest ± 0.1g.

2 hand to block the hole at the bottom of the funnel, the weighed 50g sample poured into the funnel. Note that the lower end of the powder must be filled funnel entire hole.

3 funnel moment when being opened holes and start the timer, once finished powder funnel flow, immediately stop the clock.

4 record funnel all the time required to complete the sample stream, and repeated three times, and the arithmetic mean, the time recorded is accurate to 0.1s.

NOTE: If and when the hole being opened, the powder does not flow, you can tap on the funnel look to the powder begins to flow, however, even if this is done, the powder is still not out of or in the measurement process stops flowing powder, shall be considered. This powder does not have flowability.

Test Results

The arithmetic average of the three sample results are multiplied by the correction coefficient funnel to s / 50g reported data, report data is accurate to 0.5s.

FT-102 Hall flow meter / Bulk Density Tester basic configuration: the stand: 1 set; Funnel: Stainless steel (Φ2.5mm, Φ5.0mm) each one; cup; stainless steel (Φ31mm, 25ml) 1 只; stopwatch 1 only; overflow trays stainless steel 1; brush 1; ruler 15cm 1 instruction book; warranty card; certificate.

Ricoeur Instrument Production prompt, and associated products FT-102A vibration funnel Bulk Density Tester FT-100A tap density tester;. FT-101 Scott capacity meter bulk density tester, FT-102 Hall Seoul tachometer / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass

Ricoeur instrument Companies' quality-oriented 'service first' operating principles. Meet the needs of our customers. Companies in the 'science and technology, creativity, innovation, progressive' entrepreneurial spirit, the introduction of advanced production equipment and manufacturing processes, through the improvement of continuous technical improvements and management, and strive to provide customers the best quality products and service!