In the pharmaceutical industry, the angle of repose of particles refers angle conical heap loose bulk material sandwiched ramps and horizontal reflecting particle size of the particles friction or degree of liquidity. For the same material, the smaller the particle size The larger the angle of repose, which is due to the large mutual adhesion it; generally closer to spherical particles, the smaller the angle of repose in the formulation process, the intermediate is not good flowability, tablet weight difference tablets , capsules, and granules amount of difference and so it is difficult to meet the requirements, so the process to aid in the study of the screening process flow, etc., should be based on the angle of repose, the amount of difference as an indicator of drug screening (tablet , granules) study process, we need to study the angle of repose of the particles to study mobility particles, are generally about 30 ° angle of repose for the best

FT-104B angle of repose tester

FT-104B repose angle measurement based on GB11986-89 (measured surfactant powder and granules angle of repose) provides design requirements while meeting the ISO4324-1977; powders and granules measuring the angle of repose, also applies to the USP (United States Pharmacopeia ), BP (British Pharmacopoeia) and EP (European Pharmacopoeia) Specification requirements for reference standards: DIN ISO 4324 - December 1983

FT-104B angle of repose tester The instrument is suitable for routine determination of no clumps of powdered or granular detergent surfactants and angle of repose, they can also be used for other measuring the angle of repose of a similar nature powder and granules. Material flow under specified conditions to obtain The cone base angle called the angle of repose
Disc: diameter 10MM
Funnel: diameter 155mm inner diameter of 145mm

1, in line with co-GB-T11986-98 surfactant powders and granules measuring the angle of repose technical specifications.
2, the product to meet the easy maintenance, safe, reliable, economical and practical aesthetic requirements.
3, equipment installation, commissioning and use
4, confirm the ready placement of the instrument bench horizontal.
5, according to GB-T11986-98 surfactant powders and granules measuring the angle of repose in the assembly diagram and technical specifications, installation equipment