FT-106 ordinary abrasive bulk density tester (Original DMP-II)

FT-106 ordinary abrasive bulk density tester According to international standard ISO9136: 1989 (Determination of bulk density coarse grains) and industry standard JB / T7984.2-1999 (Ordinary coarse grit abrasive Determination of bulk density) of the relevant technical requirements of development and production of special detection equipment, while meeting the GB / T20316.1-2009 bulk density tester requirements; suitable for detecting manufacturing bonded abrasives and coated abrasives coarse particles ordinary abrasive bulk density, but also for the detection of other granular materials Bulk density Its detection methods and results and generic detection methods internationally with full versatility.
FT-106 ordinary abrasive bulk density tester

The main technical parameters

1.1 Funnel Material: Stainless Steel;

1.2 funnel Dimensions: Height 240mm; top diameter 160mm; outlet diameter: (20 ± 0.5) mm;

Catchy from the bottom of the funnel and measuring cylinder: (76 ± 1) mm measuring tube size: diameter 64mm; net height 62mm measuring cylinder volume: (200 ± 0.5) cm3 measurement error: ≤ ± 0.02g / cm3.
2.1 Measurement error: ≤ ± 0.02g / cm3.
2.2 measuring cylinder volume: 200 ± 0.5cm3.
2.3 Dimensions: 230mm (length) * 250mm (width) * 425mm (H)

FT-106 ordinary abrasive bulk density tester

Note: Specific parameters, please keep in touch with us, as well as related products.

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester

Instrument Co., Ltd. Ningbo Haishu Ricoeur

(Referred to as 'Ricoeur instrument' English: Ningbo Rlco instrument Co., LTD)

Began in 1999, the Department of Ricoeur instrument enterprise systems; Ricoeur instrument enterprise system is mainly engaged in precision testing equipment and advanced detection equipment research and development, production and sales for the integration of the Industrial Company to set up manufacturing facilities in Dongguan, Guangdong Huang Town, the company's. There 'Xinke instrument' 'Ricoeur instrument' II big trademark, the products meet the requirements of international standards of IEC, CCC, UL, CSA, VDE, JIS, KS, SEV, BSI, HD, KEMA, SSA and the like.

Companies' quality-oriented 'service first' operating principles. Meet the needs of our customers. Companies in the 'science and technology, creativity, innovation, progressive' entrepreneurial spirit, the introduction of advanced production equipment and manufacturing process, through continuous technology to improve and perfect the management, strive to provide customers the best quality products and service!

The company's products have the following eight series: Precision wire (Harness) Tester, harness (wire) conduction tester series; wire and cable tester with a full set of test equipment series; a full-power wire tester and test equipment series; ; mechanical equipment and test equipment series; safety equipment series; retardant material testing equipment series; direct reading of solid / liquid density meter series; powder powder testing instrument series.

Product is suitable for wire harness processing industry, wire and cable, household appliances, plastics, rubber, powder powder, metal, shoes, and other downstream manufacturing and related industries to provide the most professional testing instruments and testing equipment for manufacturing companies to provide the most complete product testing solutions and technical advice.

Since its inception, after years of development, adhere to the interdisciplinary, cross-industry diversification, product technology high-end line of business, and always pay attention to the introduction and training of personnel, we are committed to domestic and international market development and improve technological innovation and service quality, with many loyal customers to maintain good relations in various industries, product quality and widely acclaimed. Xinke instrument '' Ricoeur instrument 'will work with our customers to a total of the progress of development. Ricoeur instrument enterprise systems affiliated with Ningbo Haishu United Xin Electronic Technology Co., Ltd. Ningbo Haishu Ricoeur instruments and other related businesses.

FT-106 ordinary abrasive bulk density tester (Original DMP-II)

FT-106 ordinary abrasive bulk density tester According to international standard ISO9136: 1989 (Determination of bulk density coarse grains) and industry standard JB / T7984.2-1999 (Ordinary coarse grit abrasive Determination of bulk density) of the relevant technical requirements of development and production of special detection equipment, while meeting the GB / T20316.1-2009 bulk density tester requirements; suitable for detecting manufacturing bonded abrasives and coated abrasives coarse particles ordinary abrasive bulk density, but also for the detection of other granular materials Bulk density Its detection methods and results and generic detection methods internationally with full versatility.
FT-106 ordinary abrasive bulk density tester

The main technical parameters

1.1 Funnel Material: Stainless Steel;

1.2 funnel Dimensions: Height 240mm; top diameter 160mm; outlet diameter: (20 ± 0.5) mm;

Catchy from the bottom of the funnel and measuring cylinder: (76 ± 1) mm measuring tube size: diameter 64mm; net height 62mm measuring cylinder volume: (200 ± 0.5) cm3 measurement error: ≤ ± 0.02g / cm3.
2.1 Measurement error: ≤ ± 0.02g / cm3.
2.2 measuring cylinder volume: 200 ± 0.5cm3.
2.3 Dimensions: 230mm (length) * 250mm (width) * 425mm (H)

FT-106 ordinary abrasive bulk density tester

Note: Specific parameters, please keep in touch with us, as well as related products.

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester

FT-106 ordinary abrasive bulk density tester (Original DMP-II)

FT-106 ordinary abrasive bulk density tester According to international standard ISO9136: 1989 (Determination of bulk density coarse grains) and industry standard JB / T7984.2-1999 (Ordinary coarse grit abrasive Determination of bulk density) of the relevant technical requirements of development and production of special detection equipment, while meeting the GB / T20316.1-2009 bulk density tester requirements; suitable for detecting manufacturing bonded abrasives and coated abrasives coarse particles ordinary abrasive bulk density, but also for the detection of other granular materials Bulk density Its detection methods and results and generic detection methods internationally with full versatility.
FT-106 ordinary abrasive bulk density tester

The main technical parameters

1.1 Funnel Material: Stainless Steel;

1.2 funnel Dimensions: Height 240mm; top diameter 160mm; outlet diameter: (20 ± 0.5) mm;

Catchy from the bottom of the funnel and measuring cylinder: (76 ± 1) mm measuring tube size: diameter 64mm; net height 62mm measuring cylinder volume: (200 ± 0.5) cm3 measurement error: ≤ ± 0.02g / cm3.
2.1 Measurement error: ≤ ± 0.02g / cm3.
2.2 measuring cylinder volume: 200 ± 0.5cm3.
2.3 Dimensions: 230mm (length) * 250mm (width) * 425mm (H)

FT-106 ordinary abrasive bulk density tester

Note: Specific parameters, please keep in touch with us, as well as related products.

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester