Powder flowability tester bulk density tester Hall flow meter

Hot FL4-1 measuring powder flowability / bulk density meter

Powder Hall flow meter / powder flowability and bulk density measuring device

Hall flow meter / bulk density meter / powder powder flowability and densitometer / powder flowability and bulk density measuring device measuring bulk density meter / powder bulk density tester

GB1479 / GB1482 powder flowability and bulk density meter

FL4-1 flowability and bulk density measuring instrument (brass)

FL4-1 flowability and bulk density measuring device (brass) The instrument according to GB1479-84, GB1482-84 Standard Specification for production.

FL4-1 flowability and bulk density measuring device For measuring powder flowability and bulk density.

Under funnel diameter: φ2.5㎜ and φ5.0㎜

Angle: 60 degrees
Capacity: 25 ml ℃

basic configuration: The stand: 1 set; funnel: (Φ2.5mm, Φ5.0mm) each one; cup; (Φ31mm, 25ml) 1 只; stopwatch 1; overflow trays 1; brush 1; ruler 15cm1 the manual ; warranty card; certificate.

FL4-1 flowability and bulk density measuring device (brass)

FT-102 Hall flow meter / Bulk Density Tester stainless steel material)

FT-102 Hall flow meter flow and bulk density measuring device Is based on the provisions of the national standard GB 1482-84 design and production. The device is suitable metal powder flowability measurement standard funnel in. Where can freely flow through the aperture to 2.5mm Standard funnel powder, can use this device.

FT-102 Hall flow meter / Bulk Density Tester It is based on national standards GB provisions of the design and production of 1482-84.

This device is intended for determination of metal powder flowability using a standard funnel in.

Where can freely flow through the aperture of 2.5mm standard funnel powder, can use this device.

1, the principle

Metal powder flowability to 50g metal powder to flow through a standard funnel predetermined aperture required to represent.

2, the instrument structure

2.1 funnel (hole diameter 2.5mm)

Funnel made of stainless steel, and has a sufficient thickness and hardness to prevent deformation and excessive wear.

2.2 bracket, base and receiver

Bracket for fixing the funnel. Base for mounting bracket and receiver, adjust the level, stable and vibration free. Stand height adjustment and fixed with the supplied wrench, funnel attached to the bracket. Receiver (Stainless steel plate) is placed in the base on to collect powder.

2.3 Balances (user-supplied)

The largest weighing 100g; precision 0.05g.

2.4 Stopwatch

Measurement time can be accurate to 0.01s.

2.5 cups

The device is equipped with a volume of 25ml stainless steel measuring cup. Users can complete the determination of metal powder bulk density (Funnel method) reference to the provisions of the national standard GB 1479-84.

3, the basic configuration: The stand: 1 set; Funnel: Stainless steel (Φ2.5mm, Φ5.0mm) each one; cup; stainless steel (Φ31mm, 25ml) 1 只; stopwatch 1; overflow trays stainless steel 1; brush 1; ruler 15cm1 the manual; warranty card; certificate.

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT103A activated clay bulk density measuring device
FT-104 alumina bulk density tester; FT-104A alumina repose angle measurement
FT-104B repose angle measurement; FT-105 Apparent density analyzer
FT-105A active agents apparent density measuring device; FT-105B slurry was apparent density measuring device
FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester FT-102A vibration funnel bulk density tester

Powder flowability tester bulk density tester Hall flow meter

Powder flowability tester bulk density tester Hall flow meter

Powder flowability tester bulk density tester Hall flow meter