FT-105A Active agents apparent density measuring device

FT-105A Active agents apparent density measuring device Scope: for free-flowing powder or granular surfactant materials, can also be used to have a lump of surfactants, but these clumps should be easy to loose and particulate materials without being broken.

Comply with the standard: GB / T6373-2007 surfactant apparent density.

FT-105A Active agents apparent density measuring device Technical Parameters:

1, Funnel: it uses free-flowing powder under a pore diameter of 40mm funnel; when a lump of powder should be used for the next funnel aperture: 60mm funnel.

2, the receiving cylinder: cylinder volume: 500mL

3, the bracket: a stationary funnel; backplane pin cylinder positioned only

4, the cutoff plate: 110 * 70mm; 5, ruler: 150mm; 6, stainless steel pipe

7, Material: stainless steel 8 Dimensions 250 * 250 * 320mm

test methods ;

5.1 The funnel is placed on the cradle, weighed by the device (that feed cylinder container) placed in a fixed position. Cutoff plate covered with a funnel at the discharge port, snapping funnel, and Hold the cut-off board, test sample into the funnel until the top of the funnel and then quickly removed off the plate, the sample flows into the funnel and overflow by container.

5.2 Remove the container, placed on a platform above the sample using a ruler to the plane Calibrating powder container. Use a dry cloth wiped clean and the outer wall of the container and the weighing accuracy 0.1g

5.3. Each sample sampling twice (in different locations)

6 calculation method, according to the standard requirements for assessment!

FT-105B The slurry was apparent density measuring device

FT-105B The slurry was apparent density measuring device Comply with the standard: Determination method GB / T6373-2007 Determination of apparent density, paste, paste or similar state surfactant product filling the apparent density, product specific parameters in accordance with standard production.

FT-105B The slurry was apparent density measuring device

FT-105A active agents apparent density measuring device

FT-105A active agents apparent density measuring device Scope: for free-flowing powder or granular material the surfactant, there can also be used to agglomerate a surfactant, but these should be readily clumps without being broken loose and particulate materials.

Comply with the standard: GB / T6373-2007 surfactant apparent density.

FT-105A active agents apparent density measuring device Technical parameters:

1, Funnel: it uses free-flowing powder under a pore diameter of 40mm funnel; when a lump of powder should be used for the next funnel aperture: 60mm funnel.

2, the receiving cylinder: cylinder volume: 500mL

3, the bracket: a stationary funnel; backplane pin cylinder positioned only

4, the cutoff plate: 110 * 70mm; 5, ruler: 150mm; 6, stainless steel pipe

7, Material: Stainless steel 8. Dimensions 250 * 250 * 320mm

test methods ;

5.1 The funnel on the stand, weighed by the device (that feed cylinder container) placed in a fixed position. Cutoff plate covered with a funnel at the discharge port, snapping funnel, and Hold the cut-off plate, The test sample is poured into the funnel, until the top of the funnel and then quickly remove the blocking plate, funnel sample container by the inflow and overflow.

5.2 Remove the container, placed on a platform above the sample using a ruler to the plane Calibrating powder container. Use a dry cloth wiped clean and the outer wall of the container and the weighing accuracy 0.1g

5.3. Each sample probe secondary (various locations)

6 calculation method, according to the standard requirements for assessment!

FT-105B slurry was apparent density measuring device

FT-105B slurry was apparent density measuring device comply with the standard: Determination of GB / T6373-2007 apparent density, apparent when the paste, paste or similar state surfactant product filling Determination of density, product specific parameters according to the standard requirements of production.

FT-105B slurry was apparent density measuring device