FT-104 alumina bulk density meter, bulk density meter aluminum fluoride

FT-104 alumina bulk density tester according to the standard

In line with GB (alumina chemical analysis methods and determination of physical performance bulk density determination) T 6609.25-2004 technical specifications. Determination of bulk density / alumina chemical analysis methods and determination of physical performance - Part 25.

FT-104 alumina bulk density tester technical parameters

1. Funnel: mouth diameter 100mm, taper 60º, within the discharge port by 6mm.

2. cylinder: about 200ml, the inner diameter of the inner high ratio of 1: 6, the base outer diameter of 70mm

3; Material: Stainless steel

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

FT-104 alumina bulk density tester requirements

Bulk density measuring device , Including the following sections:

1, Funnel: upper inlet diameter 100mm, taper 60 °, neck length 8mm, brought in under the spout inside by 6mm.

2, cylindrical containers: volume of about 200mL, Nei Jing and about 1 in the high ratio: 6, the inner bottom is flat.

3, the annular funnel rack: There are pillars in the bottom stage of sturdy funnel annular mounting frame, long screws fixed to the pillars of the ring frame, and can be freely adjusted.

The funnel installed in the cylindrical container above the predetermined level surface.

This warranty card guarantee one year, to ensure that period, as a result of poor quality, or fault of manufacture, may favor free repair.

(A) load sensors, displacement, electromagnetic switches, I am afraid can not be around within the warranty period.

(B) the cost of material costs to close the case when the following circumstances.

① improper use or damage caused by a machine malfunction.

② damage caused by his failure is assembled to form the label.

③ beyond our waiter repair, resulting in failure when disassembly.

(3) when the following conditions without guarantee.

① accident due to natural disasters or other force majeure, which led to the failure or damage.

② the use of incorrect or alteration, damage caused by the machine.

Move or transport failure occurred after ③ installation.

(four) Such as the guarantee is lost, the product warranty period from the date of manufacture to guarantee one year.

FT-104C aluminum fluoride (Alumina) Mobility analyzer. Aluminum fluoride and alumina flow time analyzer

FT-104C aluminum fluoride (Alumina) Mobility analyzer standard requirements:

According to GB 6609.36-2009-T alumina chemical analysis methods and determination of physical performance - Part 36: Determination of the flow of time;

FT-104C aluminum fluoride (Alumina) Mobility analyzer While meeting the S / T 581.17-2010 Methods for chemical analysis of aluminum fluoride and determination of physical performance - Part 17: Determination of flow This standard specifies the aluminum fluoride fluidity measurement method, that a certain quality of aluminum fluoride through a special funnel, funnel flow time measurement sample all needed.

FT-104C aluminum fluoride (Alumina) Technical parameters mobility analyzer : Funnel: stainless steel outer diameter of the funnel catchy 138.5mm, an inner diameter of 123mm, outlet diameter is 3.95mm ~ 4.0mm, the total height of 190.5mm wear resistant stainless steel catchy taper:. 60 °, 15 ° taper at the discharge port basis. GB / T66.9.36-2008 for determination of physical performance of alumina Design (flow properties)

Ambient temperature: 15 ~ 25 ℃ Relative humidity: not more than 70%.
Lighting: in line with the operating microscope to light conditions require laboratory in a natural airflow and vibration conditions.
Placed in a fume hood smooth, do not open fan. With laboratory no dust, corrosive, volatile items

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

FT-104C aluminum fluoride mobility analyzer operating video

http: //www.tudou.com/ programs / view / DGSA5FHFUUM /

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester

FT-104 alumina bulk density meter, bulk density meter aluminum fluoride

FT-104 alumina bulk density tester according to the standard

In line with GB (alumina chemical analysis methods and determination of physical performance bulk density determination) T 6609.25-2004 technical specifications. Determination of bulk density / alumina chemical analysis methods and determination of physical performance - Part 25.

FT-104 alumina bulk density tester technical parameters

1. Funnel: mouth diameter 100mm, taper 60º, within the discharge port by 6mm.

2. cylinder: about 200ml, the inner diameter of the inner high ratio of 1: 6, the base outer diameter of 70mm

3; Material: Stainless steel

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

FT-104 alumina bulk density tester requirements

Bulk density measuring device , Including the following sections:

1, Funnel: upper inlet diameter 100mm, taper 60 °, neck length 8mm, brought in under the spout inside by 6mm.

2, cylindrical containers: volume of about 200mL, Nei Jing and about 1 in the high ratio: 6, the inner bottom is flat.

3, the annular funnel rack: There are pillars in the bottom stage of sturdy funnel annular mounting frame, long screws fixed to the pillars of the ring frame, and can be freely adjusted.

The funnel installed in the cylindrical container above the predetermined level surface.

This warranty card guarantee one year, to ensure that period, as a result of poor quality, or fault of manufacture, may favor free repair.

(A) load sensors, displacement, electromagnetic switches, I am afraid can not be around within the warranty period.

(B) the cost of material costs to close the case when the following circumstances.

① improper use or damage caused by a machine malfunction.

② damage caused by his failure is assembled to form the label.

③ beyond our waiter repair, resulting in failure when disassembly.

(3) when the following conditions without guarantee.

① accident due to natural disasters or other force majeure, which led to the failure or damage.

② the use of incorrect or alteration, damage caused by the machine.

Move or transport failure occurred after ③ installation.

(four) Such as the guarantee is lost, the product warranty period from the date of manufacture to guarantee one year.

FT-104C aluminum fluoride (Alumina) Mobility analyzer. Aluminum fluoride and alumina flow time analyzer

FT-104C aluminum fluoride (Alumina) Mobility analyzer standard requirements:

According to GB 6609.36-2009-T alumina chemical analysis methods and determination of physical performance - Part 36: Determination of the flow of time;

FT-104C aluminum fluoride (Alumina) Mobility analyzer While meeting the S / T 581.17-2010 Methods for chemical analysis of aluminum fluoride and determination of physical performance - Part 17: Determination of flow This standard specifies the aluminum fluoride fluidity measurement method, that a certain quality of aluminum fluoride through a special funnel, funnel flow time measurement sample all needed.

FT-104C aluminum fluoride (Alumina) Technical parameters mobility analyzer : Funnel: stainless steel outer diameter of the funnel catchy 138.5mm, an inner diameter of 123mm, outlet diameter is 3.95mm ~ 4.0mm, the total height of 190.5mm wear resistant stainless steel catchy taper:. 60 °, 15 ° taper at the discharge port basis. GB / T66.9.36-2008 for determination of physical performance of alumina Design (flow properties)

Ambient temperature: 15 ~ 25 ℃ Relative humidity: not more than 70%.
Lighting: in line with the operating microscope to light conditions require laboratory in a natural airflow and vibration conditions.
Placed in a fume hood smooth, do not open fan. With laboratory no dust, corrosive, volatile items

Ricoeur Instruments related products Recommended: FT-104A alumina / aluminum fluoride analyzer angle of repose; FT-104C aluminum fluoride (Alumina) Fluidity tester; FT-104 alumina bulk density tester

FT-104C aluminum fluoride mobility analyzer operating video

http: //www.tudou.com/ programs / view / DGSA5FHFUUM /

Ricoeur instrument tips: You may be interested in the following products:

Common powder powder tester series

FT-100 tap density tester; FT-101 Scott capacity meter Bulk Density Tester
FT-102 Hall flow meter / Bulk Density Tester - stainless steel; FL4-1 Hall flow meter / powder flowability tester - brass FT-103 bulk density tester; FT-103A activated clay bulk density determination equipment;

FT-103B dust repose angle measurement; FT-104 alumina bulk density tester;

FT-104A repose angle measurement; FT-104B repose angle measurement; FT-104C aluminum fluoride mobility analyzer; apparent active agents tester FT-105A FT-105 Apparent density density measuring device; FT-105B slurry was apparent density measuring device; FT-105C ASTM plastic apparent densitometer; FT-106 abrasive bulk density tester (Original DMP-II)
FT-106A powder bulk density tester; FT-106B superhard material bulk density tester
FZS4-4 tap density tester; FT-102A vibration funnel bulk density tester

FZ4-3 bulk density of the funnel-type vibration analyzer; FS4-2 Skoda Bengtsson bulk density tester

DMP-II ordinary abrasive bulk density tester; FT-107 fertilizer bulk density (Loose) Tester