FT-106A powder bulk density tester

FT-106A powder bulk density tester standard requirements :

It is based on the international standard ISO9136-2: (E) (abrasives - Determination of bulk density - Part II: Powder) 1999 related to the technical requirements of development and production of special detection equipment.

FT-106A powder bulk density tester main pieces Instrument by the splice parts, vibration feed section, electrical control components.

FT-106A powder bulk density tester works The powder tested loading hopper, a bulk powder under its own role in the steady state. When the electromagnetic oscillator startup, powder under the action of electromagnetic vibration in specific ways and means of measuring flows into the bucket, will fall to Calibrating measuring cylinder of powder, Weigh Calibrating measuring cylinder soot mass in the balance, and then divided by the measurement cylinder volume, you can measure the bulk density of the test Powder

FT-106A powder bulk density tester Scope : Suitable for detecting manufacturing bonded abrasives and coated abrasives with powder bulk density, but also for the detection of diamond powder and bulk density of other fine powdery material, its detection methods and results and international common detection method has complete versatility.

FT-106A powder bulk density tester main technical parameters

Funnel Material: Stainless Steel;

Funnel Dimensions: Height 290mm; catchy diameter 190mm; spout inner diameter: 28mm; spout height: 38mm

Vibration slot Material: Stainless Steel

Vibration tank size: (210mm * 40mm * 30mm) ± 1mm

Measuring cylinder dimensions: diameter 64mm; inner height 62.2mm

Measuring cylinder V: (200 ± 0.5) cm3

Measurement error: ≤ ± 0.02g / cm3

Under funnel mouth diameter: 28mm; cylinder volume: 200ml; funnel spout height: 38mm; height of the drop measured powder: 140mm.

Ricoeur instrument company also offers related products : FT-106A powder bulk density tester; FT-106 ordinary abrasive The bulk density tester ;

FT-106B superhard material bulk density tester

FT-106A powder bulk density tester

FT-106A powder bulk density tester standard requirements :

It is based on the international standard ISO9136-2: (E) (abrasives - Determination of bulk density - Part II: Powder) 1999 related to the technical requirements of development and production of special detection equipment.

FT-106A powder bulk density tester main pieces Instrument by the splice parts, vibration feed section, electrical control components.

FT-106A powder bulk density tester works The powder tested loading hopper, a bulk powder under its own role in the steady state. When the electromagnetic oscillator startup, powder under the action of electromagnetic vibration in specific ways and means of measuring flows into the bucket, will fall to Calibrating measuring cylinder of powder, Weigh Calibrating measuring cylinder soot mass in the balance, and then divided by the measurement cylinder volume, you can measure the bulk density of the test Powder

FT-106A powder bulk density tester Scope : Suitable for detecting manufacturing bonded abrasives and coated abrasives with powder bulk density, but also for the detection of diamond powder and bulk density of other fine powdery material, its detection methods and results and international common detection method has complete versatility.

FT-106A powder bulk density tester main technical parameters

Funnel Material: Stainless Steel;

Funnel Dimensions: Height 290mm; catchy diameter 190mm; spout inner diameter: 28mm; spout height: 38mm

Vibration slot Material: Stainless Steel

Vibration tank size: (210mm * 40mm * 30mm) ± 1mm

Measuring cylinder dimensions: diameter 64mm; inner height 62.2mm

Measuring cylinder V: (200 ± 0.5) cm3

Measurement error: ≤ ± 0.02g / cm3

Under funnel mouth diameter: 28mm; cylinder volume: 200ml; funnel spout height: 38mm; height of the drop measured powder: 140mm.

Ricoeur instrument company also offers related products : FT-106A powder bulk density tester; FT-106 ordinary abrasive The bulk density tester ;

FT-106B superhard material bulk density tester