Supply Yuxin manganese sand filter removing iron and manganese

Supply Yuxin manganese sand filter removing iron and manganese

1500 CNY (218.41USD)

add to cart
Brand: Henan new models: the various
  • Media type: Ceramic
  • Suitable: water
  • use: Water Filtration
  • Types of: Efficient
  • density: 3 g / cm3
  • performance: Acid-proof
  • Adsorption rate: 98 x
  • Anti-stress: 50 kgf
  • Porosity: 55 %
  • The wear rate: 0.5
  • hardness: 7
  • Hydrochloric acid soluble rate: 0.5 %
Detailed description:
Yuxin manganese sand filter is the use of domestic quality, grain dense, high mechanical strength, chemical activity, not broken, do not dissolve in water, natural manganese sand. It looks dark brown, nearly round, the main ingredient is manganese dioxide The content of between 35% -45% manganese sand filter is made of natural manganese sand or manganese ore as raw material, crushing process, repeated screening, processed into different content of manganese sand filter appearance of rough, brown, Good iron and manganese functions, is the ideal product for water supply and drainage industry.

Manganese sand filter physical and chemical properties analysis:

Analysis of the data analysis project analysis project analysis data
MnO2 content 20-45% proportion g / cm3 3.2-3.6
SiO2 content of 17-20% Bulk density g / cm3 2.0
Iron content of about 20% hydrochloric acid soluble rate% (3.5
Clay content% (2.5% ≤1.0 wear rate
Density g / cm3 2.66 MnO2% 30-40
Bulk density g / cm3 1.85 Broken rate% ≤1.0

Manganese sand filter uses

Natural manganese sand iron is a contact catalytic iron removal process, the iron content of less than suitable for groundwater in addition to iron 20mg / L of divalent iron oxide and manganese can water high natural manganese sand containing ferric iron, at the same time formed on the surface catalysis of 'active membrane', to further improve the iron effect after iron water aeration, only once by the natural manganese sand filter, you can complete the entire process in addition to iron.