PAC use
1, according to the water quality should be used to carry out a small test, elected purification effect, put a small amount of the best point solution should be with the distribution with the use of non-potable water should be selected according to the amount of the actual situation.
2, the use of a solid, first dissolved in water to accompany dubbed 10-25% solution, then diluted with water to the desired concentration, at the time of dissolution before adding water slowly feeding, and continue stirring.
3, water treatment chemicals from different manufacturers or different brands can not be mixed, and may not be mixed with other chemicals exist.
4, slightly corrosive liquid and diluent, but lower than other types of inorganic flocculants.
5, effective storage products: Liquid six months, two years after the solid product solid tide still be used.
6, the product after reasonable dosing, purified water meets drinking water health standards.
Process Category
a, drum-type poly (co) of aluminum chloride aluminum content in general, water insoluble high, used for wastewater treatment. b, frame-poly () aluminum chloride, aluminum content is high, water insoluble low for sewage treatment and drink processing.
c, spray drying poly () aluminum chloride, aluminum content, low water insoluble, dissolution speed. higher standards for drinking water and water treatment.

The company supplies water treatment chemicals Yuxin PAC quality assurance, welcome to consult the discussion.