4FE + CATV port EPON ONU-- receiver built in little light boat Communications

bargain

SF40F EPONONU is built FTTH type CATV optical receiver, in line with IEEE802.3ah, YD / T 1475-2006 and CTC 2.1 standard 4 FE ports EPON terminal device, its small size, good manageability, built-switching function. The product particularly suitable for new residential dual-fiber home (FTTH), with a very high price.

(product description)

l provide two optical ports (one for the PON optical port, the other one is the wavelength of 1310nm or 1550nm CATV optical)

l Provides four 10 / 100Base-T LAN ports adaptive

l provide a CATV coaxial RF input

l export

l provide CATV RF signal gain adjustment manually (MGC) functionality

l DC 12V 1A power adapter

(Product Features)

lCATV optical power receiving range: -10 ~ + 2dBm;

lRF output bandwidth of 870MHz (maximum to 1GHz);

lRF output level 75dBuV, adjustable in the range of 0 ~ 20dB;

l supports 4094 VLAN, support VLAN stacking (QinQ);

l Support port isolation;

l support to 8K MAC address learning and aging wire-speed, support MAC address restriction;

l support port loop detection and alarm reporting;

l Support IGMP Snooping, controllable multicast support CTC;

l support the priority queue scheduling, support SP, WRR or SP + WRR scheduling algorithm;

l Support port speed, support suppression;

l Support Dysing Gasp;

l supports Telnet and CLI;

l Support remote software upgrades.

(Product Specifications)

Hardware Features
Business Port	It provides two optical ports (one for the PON optical port, using SC / PC optical interface; the other one is 1310nm or 1550nm wavelength CATV optical interface, using SC / APC optical interface)
	It provides four 10 / 100Base-T LAN interface adaptive
	Provide a CATV coaxial RF output port
	CATV RF signal to provide a manual gain adjustment (MGC) functionality Provides built-in optical receiver manual gain adjustment (MGC) functionality
Data Exchange	Built-in Ethernet switching capabilities
LED lights	POWER indicator ONU power supply status
	PON, LOS, RUN, LAN1 ~ 4 respectively indicate the ONU registration status, ONU running state, PON port optical signal states and four LAN port Link and Active status
	CATV optical receiver built-OPT indicates working status
power supply	DC 12V 1A power input
Power Adapter	100V ~ 240V AC / 50Hz ~ 60Hz
Power	( = 8W
weight	0.58 Kg
Operating temperature	-10~55℃
size	185mm (length) * 110mm (width) * 35mm (H)
Service Features
EPON standard	Accord IEEE802.3ah, YD / T 1475-2006 standard and CTC 2.1
Dying Gasp	Support Dysing Gasp reported
VLAN	4094 VLAN support
	Supports 802.1Q VLAN, SVLAN
	Support VLAN Stacking
MAC address learning	Support 8K MAC addresses
	Hardware-based wire-speed MAC address learning
	Support static MAC address, support MAC address restriction
Multicast	Support IGMP Snooping, controllable multicast support CTC
Multicast	It supports 128 multicast groups
Quality of Service (QoS)	Supports the purpose IP, source IP, destination MAC, source MAC, VLAN priority, VLAN ID, Ethernet frame type, 802.1p priority, DSCP, TOS, flow classification
Quality of Service (QoS)	It supports four priority queues, support SP, WRR or SP + WRR scheduling algorithm
Loop Detection	Support port loop detection and alarm reporting
Port Isolation	Support port isolation
flow control	Support IEEE 802.3x full-duplex flow control
flow control	Support suppression, support port speed
Management and maintenance	Support Telnet, CLI management configuration support
Management and maintenance	Support equipment remotely upgrade software and configuration files