LAW series of computer controlled servo horizontal tensile testing machine

• The main purpose:

LAW series of computer controlled servo horizontal tensile testing machine with a whole rack steel welded frame structure, single-rod double-acting piston-cylinder test force applied, cylindrical pin plug sample load force sensors, according to the sample size length There are levels of adjustment stretching space, computer screen controls and displays test force and test curve, according to the requirements of the test method automatic processing of experimental data. This machine is lifting belts, chain and cord do product category-by tensile testing equipment, with tensile load in one by one, destruction test sling products require flexible and convenient to operate, load slow and steady, strong body carrying capacity and so on.

• Features:

1 Host:

1.1 The overall use of steel welded frame chassis structure, the main structural components of the system before and after the cartridge seat, fuel tank and front beam;

1.2 After the collet seat manually push mode to test space-level adjustment;

1.3 Host shape on the basis of the horizontal test equipment to meet the technical requirements for the design, modeling concise, proportion, color matching and reasonable, so that the stability, security, test equipment, aesthetics perfect unity.

2 oil source system (pumping):

2.1 a 10l / min, 30MPa Constant Pump: using well-known brand motor, low noise, high-pressure gear pump imports.

2.2 motor is installed with a damping device (optional damping pad), to reduce vibration and noise;

2.3 Fuel tank: closed standard tanks, volume 80 liters, with oil temperature gauge, oil level gauge, precision pressure filters, air filters, etc. and with oil temperature, liquid level, oil barrier protection and indicating means, according to the oil use requirements with corresponding high-precision oil filtering equipment.

2.4 has a temperature over the limit, filter clogging level is too low, such as automatic shutdown or alarm function;

2.5 pipeline system: the master cylinder loader, chuck actuator using high-pressure hose connected to the hydraulic lines.

3 control system:

3.1 pairs of channel control panel used in all digital circuits, consistent with the structure, improve the interchangeability of the channel;

3.2 computer screen to complete the integration of data to control the display and test curve display;

3.3 Data storage functional, historical data can be reproduced with the graphic display;

• Technical Parameters:

product number	LAW -500	LAW -1000	LAW -2000
The maximum test force (kN)	500	1000	2000
Test force measurement range	10 KN-500kN	20 KN-1000kN	40 KN-2000kN
Indication accuracy test force	±1%
Displacement measurement resolution	0.01mm
Test speed	0-80mm / min
Slider load fast forward speed	Not less than 200mm / min
Test space (Excluding piston stroke)	500-6000mm (there is a file-level adjustment 500mm)
Piston stroke	1100mm
High Work Center	350mm
Host Dimension	9000x1200x500mm